SLI Support?

[von Pilsner]

Originally Posted by droz

I'm almost positive a post was put up saying SLI works in CLOD, but Nvidia hasn't put something specific in their drivers yet for CLOD to take full advantage of it, or something like that. Just going off what I can remember.

Luthier said that, but it turns out he was wrong.

[RickRuski]

Funny, Sli seems to be working reasonably for me. I have some micro stutters as I have always said but Sli gives me nearly double the frame rates of a single card in my setup. With GTS 450's some would think that I shouldn't be getting the results that I have so something with my system must be working. Those that aren't getting the results that they think they should with Sli, try altering the Nvidia Inspector profile to get the best you can until official support arrives (if you don't use N/I download and install it and if necessary make your own profile, or have a look at my post on the subject and use that as a start point).

http://forum.1cpublishing.eu/showthread.php?t=26236

[Wolo]

Rick Rusky, i tried your sli config but i have bad results. My fps are ranging 20/60 (vsync on) and have lots of stutters. Im new to sli, just bought a second hand gtx 580 3gb phantom last week and im trying to configure to clod.
Im using nvidia drivers 301.42 and the last beta patch, do you have your sli config working on the last nvidia driver? or you are still using 285.27?
Im not sure if changing this can improve my sli performance.

here is my result with a little fiddling around

1600/900 all high no trees on realy smooth to

[RickRuski]

Hi Guys,

What I've done is no O/C of V/cards. I'm using EVGA precision tools to balance both cards to same clocks, this tool will work with any Nvidia cards. I'm also using Nvidia Inspector to make my own profile that my previous post refers to. I don't have Vsync on, I've also turned off shadows and grass. Can't see any sense having grass on when all the flight action is normally 1000m + (who can see the grass details from that height?) even if you are doing ground attack the aircraft is going too quick to see much detail like grass. About the only time you will have the advantage of seeing that will be during take off and landing.
Wolo, your card if I have it right is a dual chip on the one card, I don't have any experience with those, maybe another member who has a similar setup to you could help with that. Here's some screen shots of my Inspector settings, video setup and action screen low over London. There are 2 lots of screens no.1 are with grass and shadows ON, no.2 are with those 2 turned OFF you can see the big difference in fps. I don't appear to have any tearing so I don't use vert/sync. I have tried AA and don't see a lot of advantage using anything over 2x . In the screen of my C/P you will notice that in the physics panel I have nominated CPU, I find that works best for me (even though C.o.D dosen't use physics).

Haven't seen your what your pc system is, what M/b, ram, CPU etc. Have you got any of it o/clocked?

Can't get files upload to work at the moment, will upload later.

[RickRuski]

Wolo, Here's the other 2 screens.

[Wolo]

My systems specs are:
i5 2500k 4.2
2 gtx 580 3 gb ( single core each, no overclocked )
8 gb ram
ssd 120 gb
p8p67 pro
I will try lowering some settings like shadows, forests etc... for testing if i get better results.
To the people who have sli working, which nvidia drivers are you using?