|
|
|
|
#1
07-07-2008, 11:38 PM
|
|||
|
|||
Very similar config to mine dflc03, not sure if this might help but try changing all the entries with "NV" to a value of 1 eg:
TexFlags.TextureShaderNV=0 TexFlags.TextureShaderNV=1 Think the zero value is specific to nvidea cards. 
|
|
#2
07-08-2008, 05:49 AM
|
||||
|
||||
|
@smartDalek
"Think the zero value is specific to nvidea cards." there you got it wrong, matey. You set 1 if there IS a nvidia-card installed.
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects 
|
|
#3
07-08-2008, 06:23 AM
|
|||
|
|||
|
My mistake robtek, thx for the correction.
Have it at 1 on this rig, thought I'd reset it, apparantly not. Knew I changed values on the old rig but so long ago I forgot which value.
|
|
#5
07-08-2008, 07:19 AM
|
|||
|
|||
|
dflc03 have you tried going into il2 setup and resetting the the vid cards preferences?, maybe it might cure the problem by choosing a more appropriate setting, fwiw I chose max settings and no probs here.
|
|
#7
07-08-2008, 08:50 AM
|
||||
|
||||
|
open the IL2setup.exe and try choosing the ATI x9xxx settings if that doesn't work try down loading the 4.09 dll files and try those
http://forum.1cpublishing.eu/showthread.php?t=2839 also make sure your not running the CCC with the Advanced AI settings on too.
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
