Ati 4850

[dflc03]

As said before - my settings, probably wrong for HD4850

[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=1

TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=0

HardwareShaders=1

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=8
Water=2
Effects=2
ForceShaders1x=0

PolygonOffsetFactor=-0.0625
PolygonOffsetUnits=-1.0

[SmartDalek]

Very similar config to mine dflc03, not sure if this might help but try changing all the entries with "NV" to a value of 1 eg:

TexFlags.TextureShaderNV=0

TexFlags.TextureShaderNV=1

Think the zero value is specific to nvidea cards.

[robtek]

@smartDalek

"Think the zero value is specific to nvidea cards."

there you got it wrong, matey.

You set 1 if there IS a nvidia-card installed.

[SmartDalek]

My mistake robtek, thx for the correction.

Have it at 1 on this rig, thought I'd reset it, apparantly not.

Knew I changed values on the old rig but so long ago I forgot which value.

[dflc03]

So, basically the settings are right and the overall result is wrong

[SmartDalek]

dflc03 have you tried going into il2 setup and resetting the the vid cards preferences?, maybe it might cure the problem by choosing a more appropriate setting, fwiw I chose max settings and no probs here.

[dflc03]

I am on max settings...and a world of trouble. Tried also the 3XXX settings, nothing better