Il2 1946 on steam resolution issues.

[DAD2MAXWELL]

Well my monitor is a DELL 3007WFP it is a 30'' flat screen, NVIDA control panel says that the native resolution for this monitor is 1280x800, but I run my desk top at 2560x1600.



I tried matching the config.ini from IL2FBAEP V1.22 to 1946 as IL2FBAEP runs beautifully full screen, but no joy, I am missing one thing here.

Heading off to work and will try later today, thank you, and I will let you know what happens early this evening.

jgp

[droz]

width=2560
height=1600

That's what you should be running it at. It should work without issue.

If it doesn't, try

width=1920
height=1200

or even

width=1920
height=1080

Try them in order and see how that works.

Also, make sure all of these setting are exactly like this:

ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0

One last thing, before doing any of this, make sure you are using OpenGL mode in the in game video settings.

[MadBlaster]

"BUT if you alter your conf.ini and then change the menu settings your altered settings are reset."

Yes, this is worth restating. You could go round and round in circles.

[JtD]

Is it possible that Steam ignores the conf.ini and uses settings saved somewhere in the dreaded steam cloud?

[DAD2MAXWELL]

Cant wait to get home to try all of this, however confused by the OPEN GL thing.

Do I chage that in the config ini settings, as whenever I get things almost right and then touch that within game, things go to hell again.

IF IL2FBAEP runs in DX, DO I HAVE TO USE OPEN GL?

JGP

[droz]

no, change it IN GAME. Do that before you do anything. Make sure all your video modes and video options settings are where you want them to be, and then go in and change the conf.ini file. IL2 was designed to utilize OpenGL, and will perform MUCH better than in DX mode. TRUST ME. Do not run it in DX mode. The only time you would want to run DX mode is when you are trying to use fraps to record.

[DAD2MAXWELL]

That is part of my problem DROZ, if I dont get the resolution right BEFORE I start the game, I cant get in because the menu screens are off center to the right, and I cant get to the set up/hardware menus where I would select open gl etc.

JGP