BETA PATCH v1.06.17582--Bug thread

[Jatta Raso]

Originally Posted by atag_doc

this is definitely an alpha. Probably will be a few other alpha releases before a beta comes along.

All in all this is a step in the right direction. I started having crashes where i didn't before.

I could easily say its a step back but i have to be more objective about this.

It's smoother to me. No ctd in bombers yet and that could easily be reproduced within 10 minutes. That is gone.

Just send in your crash files and lets get this done. I'd hate to have to fix everyone's particular setup but this is what you get when you develop for pc's and not consoles.

Get busy and play a lot. Enable log=1 and flood'em. Sooner we get this done the better.

this

[kilosierra]

For those thinking the throttle is bugged, check the axis settings of the throttle.

Very likely the 100% position is messed up. Check if 0% is at 0% and 100% at 100 %, then input and output should match again.

[ATAG_Dutch]

Originally Posted by kilosierra

For those thinking the throttle is bugged, check the axis settings of the throttle.

Axis checked and re-adjusted, thanks for the tip.

However throttle response is still very twitchy. It's tolerable with some a/c, but too twitchy on others, particularly Spit II.

Also my rudder control sensitivity is now set at 10% but still too twitchy (spikey is probably a better term).

G940 HOTAS here.

[FFCW_Urizen]

Originally Posted by ATAG_Dutch

Axis checked and re-adjusted, thanks for the tip.

However throttle response is still very twitchy. It's tolerable with some a/c, but too twitchy on others, particularly Spit II.

Also my rudder control sensitivity is now set at 10% but still too twitchy (spikey is probably a better term).

G940 HOTAS here.

What settings did you use? Because the first thing i did, was checking throttle mapping to see, if anything was screwed up. I even reassigned throttle axis, the problem is still there. Checked input vs output, which is the same as before the patch.

[David198502]

Originally Posted by FFCW_Urizen

What settings did you use? Because the first thing i did, was checking throttle mapping to see, if anything was screwed up. I even reassigned throttle axis, the problem is still there. Checked input vs output, which is the same as before the patch.

yeah i think its the new "flight model" which makes it harder to give accurate inputs on rudder,aileron and elevators...regarding the throttle, i didnt notice a difference, but then im a 109 driver as you know Urizen

[ATAG_Dutch]

Originally Posted by FFCW_Urizen

What settings did you use? Because the first thing i did, was checking throttle mapping to see, if anything was screwed up. I even reassigned throttle axis, the problem is still there. Checked input vs output, which is the same as before the patch.

Here you go Uri.

[Jatta Raso]

messed up windshield after crash land; new look of the rear view mirror turned off, after taking shots..

maybe nothing new, just adding to the mess up on Spit IIa after taking damage

[FFCW_Urizen]

Originally Posted by ATAG_Dutch

Here you go Uri.

Thanks Dutch, though i fear, that it won´t help me, as my settings are already very near yours. but testing them anyway.

[Toxic]

CTD all the time, no performance change at all, it even seems like the FPS has gone down. But I am sure you've all heard about this...