3-axes trim wheel / Do-it-yourself-style

[von Brühl]

Crazy looking, but nice work! ~s!

[Kodoss]

Today I tried to finish the front plate.

I took my little helper (which you can see below of my trimwheel) and made 2 little cuts for each trimwheel. After that I used a saw to deepen it.
Then again with the dremel( ok, it not a real dremel ) cuting the strips out.
After 4 hours of work, it still needs some adjustments so that I can turn the wheels without touching the housing with the rings.

Also it was a good idea from me to screw the rudder-plate on the back-housing.
Because to fit everything together I had to screw it of first.
Putting all parts together ( wiring, switches, trimwheels, housing) will become the toughest thing...
I also attached the side parts for checking, but they aren't drilled now for final assembly. The hole for the USB-cable is also missing.

Enough of words! Pics, pics, pics!!!

PICT0031.JPG

PICT0036.JPG

PICT0035.JPG

[Kodoss]

!!Update!!

The frontplate fits now with the trimwheels.
I also put the switches and buttons in it for checking.
The only metal work that remains are the side-parts. Fixing them, drilling holes, cutting threat in them. The usual stuff.

PICT0037.JPG

PICT0041.JPG

Left side.
PICT0040.JPG

Belly of the beast!!
PICT0039.JPG

Solding will wreck my nerves. But before I have to choose a color and the painting method.

[tintifaxl]

This is awesome work here.

[gimpy117]

i say Luftwaffe cockpit grey, looks German to me

[Kodoss]

!!!Update!!!

Ok, not a real one...
Today I just bought some cable for wiring and screws M4x10.

Also I did a little fitting test with my 2 throttle quadrants.

PICT0042.JPG

plan for tomorrow: adjusting the sideparts, solding and testing.

After that: -disassemble,
-breaking the last sharp edges on the plates,
-powder coating RLM 66 or black (might take some time)
-assembly
- having fun

[Madfish]

Looks awesome. Have you used it for a while yet while playing? I want to build something similar but I was worried about the ergonomics. If you could please provide some insight on how it feels with the 3 axes alignes like this.