Disgrace

Stonedraider you seem like a cool guy have you got in any multiplayer games cus my server list has no populated servers?

[StonedRaider]

Originally Posted by Bob_Marley

Stonedraider you seem like a cool guy have you got in any multiplayer games cus my server list has no populated servers?

I have managed to get into a few servers previously, but have not tried in the past 2 weeks (just have not played at all, waiting and hoping on this patch).

The way i fixed this problem before was to disconnect form the internet, close Steam, reconnect, Login and try again. If all that failed (and it did a number of times) I connected directly via IP.

Do you mean you see Servers but with no players? Or no servers at all? Since its monday and working hours here, it just might be that people are busy. wait until around 6-9 PM GMT.

Originally Posted by StonedRaider

I have managed to get into a few servers previously, but have not tried in the past 2 weeks (just have not played at all, waiting and hoping on this patch).

The way i fixed this problem before was to disconnect form the internet, close Steam, reconnect, Login and try again. If all that failed (and it did a number of times) I connected directly via IP.

Do you mean you see Servers but with no players? Or no servers at all? Since its monday and working hours here, it just might be that people are busy. wait until around 6-9 PM GMT.

Too bad Stoned but thanks anyway just as long as i know there is nothing wrong at my end.

[StonedRaider]

Originally Posted by Bob_Marley

Too bad Stoned but thanks anyway just as long as i know there is nothing wrong at my end.

Probably not at your end. Everyone has issues with the Game. Mine have been since the start. It would not hurt for you to post your Specs so we can see if there is 1 specific component that could be limiting everything else, giving bad preformance. It might not be, after all my PC is in shape but still struggles.

[Feathered_IV]

I had the exact same specs as Sutts, with the exception of a 1gb GTS260 and also had less trouble running the game than I do now after upgrading.
These days I have a 2500k, Win7 64 bit, 16gb DDR3 and a GTS 450, but my fps are clamped at 24/27 frames per minute on both low settings and high. Fps are identical when downsizing resolutions too. I'm hoping the upcoming patch will make the thing viable at last.

Core i5 2500K 3.30GHz @ 4.40GHz 4 gig memory HD 6970 OC 2048MB GDDR5
windows7 64bit 1920x1080

[kilosierra]

Originally Posted by StonedRaider

I have this system:

I7 2600K
12 GB 1600 DDR3 RAM
Asus P8p67 pro board
2xAsus ATI 6970 overclocked to run at 920 mhz
64 GD SSD (with win7 and CoD installed only)

How did you get 12 GB into a P8P67?

Those are Double-Channel boards and AFAIK there are no 6 GB sticks on the market. Mixing sticks of different size and specification isn`a good idea either.

[Bokononist]

Originally Posted by kilosierra

How did you get 12 GB into a P8P67?

Those are Double-Channel boards and AFAIK there are no 6 GB sticks on the market. Mixing sticks of different size and specification isn`a good idea either.

Ah yes but you can get 4GB sticks, so 3 x 4 GB dimms would be my guess, I have 4 x 2, but that's because I upgraded from my original 2 x 2 config.

[StonedRaider]

Originally Posted by kilosierra

How did you get 12 GB into a P8P67?

Those are Double-Channel boards and AFAIK there are no 6 GB sticks on the market. Mixing sticks of different size and specification isn`a good idea either.

3x4GB modules.

Corsair Vengeance 12GB (3x4GB) DDR3 PC3-12800C9 1600MHz Triple Channel Kit (CMZ12GX3M3A1600C9)

Lane 1,3,4. No problems so far. System registers 12GB and has used up to 10.5 at one point. Also iirc had to edit something in the BIOS as per manual.

[kilosierra]

Originally Posted by StonedRaider

3x4GB modules.

Corsair Vengeance 12GB (3x4GB) DDR3 PC3-12800C9 1600MHz Triple Channel Kit (CMZ12GX3M3A1600C9)

Lane 1,3,4. No problems so far. System registers 12GB and has used up to 10.5 at one point. Also iirc had to edit something in the BIOS as per manual.

Of course it works, but you probably cut down the performance (and maybe the stability) of your rig.

See here:

http://www.asus.com/Motherboards/Int...P8P67_PRO/#MSL

Asus obviously recommends using either 1, 2 or 4 banks, while using only one is single channel. I would guess with using 3 banks, you forced the board into single-channel mode too.

Triple channel works only on boards supporting it, with the P8P67 series not being amongst them.