Warthog Throttle not working properly

[ParaB]

Had the same problem some time ago, sent it in to the dealer and got a replacement within a week or so.

[Flanker35M]

S!

Will pick the stick apart as the local dealer only applies local rules on guarantee Seems to be a wire or something as the stick movement causes some other buttons to react etc.

[mxmadman]

Make sure these inconsistencies are happening outside of Clod as well. You want to atleast be sure its a hardware problem and not in the game before you get the soldering iron out. If the calibration menu shows every button and axis working as intended, you've eliminated that possibility.

If the calibration works fine, I would make sure clod recognizes the axis as it should and then make sure no other buttons are assigned to iit in clod. Clod allows multiple assignments for one buttonand that would cause the problem you're experiencing.

If you can see a pattern (I.e. stick forward = toggle mirror everytime) then you can narrow it down to that one key assignment.

Good luck and let us know if your stick works fine in other sims/calibration.

Edit: I'm focusing on the software side because if its the hardware I wouldn't be able to provide any tips at all =/ here's hoping its software.

[Flanker35M]

S!

It is hardware as calibration shows erratic movement ie. the input jumps from full to low,smoothly moving the axe also makes microstick to react etc. Last resort to call the company and ask if they would change the throttle. Really annoying

[mxmadman]

Originally Posted by Flanker35M

S!

It is hardware as calibration shows erratic movement ie. the input jumps from full to low,smoothly moving the axe also makes microstick to react etc. Last resort to call the company and ask if they would change the throttle. Really annoying

Aww that's too bad. Make sure you don't void the warranty before calling! Good luck.

[Flanker35M]

S!

Did call, can send back the unit for free or go to their nearest dealer personally. I guess they just slap me a new package and send the old one to the factory. And this just under release of the patch! AARGH!