![]() |
|
#1
|
|||
|
|||
![]()
Warplanes did not fly level to shoot down other planes, period.
Edit: About the MW50, the WEP button for MW50 is more like an 'arm' switch. Enabling it doesn't mean MW50 fluid is engaged. To do that you should push your throttle pass 100%. But the current problem on MW50 boost is that it is not able to be engaged over 4 minutes in dogfight, otherwise the engine will be blown out. And although I don't push my throttle pass 100% while it is armed, it still makes engines overheat faster than it is not armed.
__________________
Why do some people tend to take it for granted that others have poorer knowledge background than themselves regarding the argument while they actually don't have a clue who they are arguing with in the first place? ![]() Last edited by jermin; 02-12-2012 at 01:09 PM. |
#2
|
||||
|
||||
![]()
Last time I checked you can turn, climb and dive with any of the planes in the game. You just have to understand that time limit for various power setting is just one of the limits and it is used in conjunction with other limits.
In other words, if Military setting is allowed for 10 minutes max. that doesn't mean that you can always use it for 10 minutes. It depends on other factors would you be able to squeeze all 10 minutes of Military Power. Very simple example is plane on the ground, there is no plane that will allow you to use full MP time while you are sitting on the ground. Under these conditions your limit will be temperature and that apply for other flight regimes too. If you dive at full power and your engine is overrevving you must reduce the throttle no matter that you might be still under permitted time for full power. Quote:
__________________
|
#3
|
|||
|
|||
![]() ![]()
__________________
Why do some people tend to take it for granted that others have poorer knowledge background than themselves regarding the argument while they actually don't have a clue who they are arguing with in the first place? ![]() |
#4
|
|||
|
|||
![]()
You mean like, I can activate it, but it will show no effects unless I pass 100%?
Please say yes. |
![]() |
Thread Tools | |
Display Modes | |
|
|