![]() |
|
|
|
#1
|
|||
|
|||
|
I thought the triple monitors wasn't working at the moment?
|
|
#2
|
||||
|
||||
|
TH2G is transparent to CoD.. to any game really
Even to windows to some extend My '3' 1280x1024 show up as '1' 3840x1024 monitor to windows Win7 seven detcts TH2G such that you don't even need to install the MATROX software.. But, at some point you will have to install the MATROX software to config the TH2G device.. but I did that once, a long time ago, and when I upgraded from XP to Win7 I didnt need to reinstall the MATROX software becuse the device config is held on the device Long story short, as far as Win7 knows I have '1' 3840x1024 monitor
__________________
Theres a reason for instrumenting a plane for test..
That being a pilots's 'perception' of what is going on can be very different from what is 'actually' going on. |
|
#3
|
|||
|
|||
|
Quote:
Second post from the top: http://forum.1cpublishing.eu/showthr...t=28341&page=3 ~S~ |
|
#4
|
||||
|
||||
|
Quote:
Note what Luither said in that post, i.e. Quote:
__________________
Theres a reason for instrumenting a plane for test..
That being a pilots's 'perception' of what is going on can be very different from what is 'actually' going on. Last edited by ACE-OF-ACES; 12-15-2011 at 10:09 PM. |
|
#5
|
|||
|
|||
|
Oh yes it is. Nvidia surround gaming is active as well as ATI. There are vids on here of it in action.
|
|
#6
|
||||
|
||||
|
I can confirm that!
Quote:
Can you tell me if you 'need' two video cards for that? As in each vid card only has two DVI outputs.. thus you need a 2nd card to use one of the DVI outputs for the 3rd monitor I think some do it by using the HDMI output for a total of 3 using one card? Anyway.. If you do need two vid cards.. The nice thing about TH2G is you only need one (good) vid card, because TH2G only needs one vid card DVI output to drive all three monitors TH2G cost around $150 last time I check
__________________
Theres a reason for instrumenting a plane for test..
That being a pilots's 'perception' of what is going on can be very different from what is 'actually' going on. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|