So to do a un-install,clean all the files out and re-install...what's the method? :)

[KG26_Alpha]

What's happens is the whole folder and contents of >

C:\Users\name\Documents\1C SoftClub\il-2 sturmovik cliffs of dover\conf

if deleted is regenerated by the main installation >

C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover

But the conf file in the main installation has some settings missing compared to the Documents folder conf file, so these are picked up and re-generated into the new conf in the documents folder with various other settings you may have applied to graphics or the CoD system under the GUI.

This is my old rts, I'm wondering if the missing strings are moved somewhere else now ?

[rts]
tickLen=30
;ProcessAffinityMask=3
maxTimerTicksInRealTick=20
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=1
DisableIME=0
culture=en-GB

[core]
RandSeed = 0
TexQual=3
TexFlags.PolygonStipple=0
Shadows=1
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
LandShading=2
LandDetails=2
Sky=3
Forest=4
VisibilityDistance=3
LandGeom=2
DrawCollisions=1
Water=-1
Effects=2
EffFlags.Light=1
EffFlags.SpriteRender=0
Grass=3
CordEffect=1
UseFog=0
UseLandCube=1
UseLandConnectedObject=1
LinearObjectManager=1
Roads=1
Sun=1
Clouds=1
EffFlags.LightSpritesProj=1
ShadowMapSize=5
TexFlags.AsyncLoad=1
TexFlags.ShowTexture=0
SimpleMesh.SWTransform=0
SimpleMesh.QuadTreeClip=1
SimpleMesh.InstancingHW=1
EffFlags.LightContextSprites=1
CloudsFlags.Detailed=1
TexFlags.CreateHDR=1
Decals=2
EffFlags.SWLight=0
TexFlags.CockpitOnePass=0
MegaTexture=0
TexFlags.Reflection=0
RenderTargetQual=3
MSAA=4
MeshStatics=3
MeshStaticsDetail=4
SimpleMesh.QTNoCompose=0
MeshFirstLod=0
MeshShowLod=0
SpawnHumans=0
TexFlags.SSAO=1
TexFlags.VSync=1
TexFlags.FastTransparency=1



After regenerating the C:\Users\name\Documents\1C SoftClub\il-2 sturmovik cliffs of dover a few times,
then flying and applying different GUI settings,
there's different conf files produced with parts missing.

It could be something significant or something insignificant...................off to find a wall to bang head.







.