![]() |
|
|||||||
| Technical threads All discussions about technical issues |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I have used both FTv2.2 and TIR4 ultra. I prefer FT, with a good webcam (PS3 eye at 100fps), IR filter and the correct wide angle IR leds (SH485) found it just as good as TIR. My FT clip is powered off the USB just as a TIR clip would be. Needless to say I sold my TIR on Ebay.
I have one profile and haven't changed it since CloD was released so not sure why you have to change it at all. The latest update seems to have caused some problems and FTsometimes locks up when I go into the menu, why it suddenly started doing this I don't know, having said that, no one else is reporting similar issues so it may be the PS3 eye that is conflicting in my OS. Its fine with a standard 30fps webcam. The biggest advantage for me is that FT allows keystrokes to be assigned to any of the 6 axis and these can be assigned to a POV. In dogfights, or for accurracy, I will often disable two of the unwanted axis. I personally couldn't see a big enough advantage using TIR over FT. I can change/replace the camera and LED's far more cheaply so the decision for me wasn't that difficult to make.
__________________
MP ATAG_EvangelusE AMD A8 5600K Quad Core 3.6 Ghz - Win 7 64 - 8Gb Ram - GTX660ti 2Gb VRAM - FreeTrack - X52 - Asus 23' Monitor. |
|
#2
|
|||
|
|||
|
freetrack, a crap webcam (ir filter removed) and 10euros for a homemade tracking device. A conscious setup and it works perfetcly. Save your money and forget about TIR.
|
|
#3
|
|||
|
|||
|
@OP, sounds like your setup could be better. With a decent webcam and some SH485 LEDs you should be fine under any conditions. I can't overemphasise the importance of getting the right LEDs!
Last edited by jimbop; 11-08-2011 at 08:25 PM. |
|
#4
|
|||
|
|||
|
I've just made my first starts with my new tracking device. Three IR LEDs side clip, VX-3000 cam, latest FreeTrack, w7 64bit. With two other sims its work "out of the box" (after a short basic setup in FT), but with CoD is not so easy. Everything is too sensitive and nervous.
I tried to tune it and i can have good wide movements to check six or very smooth motion to operate in the cockpit but nothing in between. I know its about taste, but a CoD profile could help me a lot to find what I'm looking for. Is there any public one? Do you have a good one? |
|
#5
|
|||
|
|||
|
Quote:
|
|
#6
|
|||
|
|||
|
PS3 Eye cam + homemade 3 point clip (USB). I use it flawless with CloD, IL-2 46, ArmA series, even in BF3! You just need a GOOD cam without IR filter.
Seriously, i never understand why people have so much trouble with Freetrack. The software itself is more flexible than TrackIR one. I have multiple profiles for each game, and i just click in the one i want to use. Variable (and strong) ambient light conditions will influence two solutions, the same way. |
|
#7
|
|||
|
|||
|
Thanks jimbop!
I played a bit with the curves and the global setting, its better but not ok. LoBiSoMeM, I'm using l-934f3c LEDs, removed the IR filter from the cam and made a daylight filter from a floppy. FT works perfect without any in deep setup with Condor or RoF! With Default profile or Sensitivity at 1 and full smooth and I use it as I always had it! In CoD its not so easy, narrow smooth movements or wide and nervous popping what I have (now). Its not so easy to fine tune it (I think the main problem is the missing FT option in the game.) |
|
#8
|
|||
|
|||
|
Quote:
|
|
#9
|
|||
|
|||
|
any free track users able to send me profiles for clod using a 3point system(im using a trackclip)
|
|
#10
|
|||
|
|||
|
Quote:
http://forum.1cpublishing.eu/showthr...130#post382130 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|