SLI working

[Winger]

I have 3x GTX 480 SLI and i tried to use the settings shown above ->

"Working SLI-Bits to edit with NVIDIA Inspector 1.9.5.5

Click at Profile Settings (besides the "Driver Version"),
create Custom Profile and click "add application to current profile" to add launcher.exe.
edit:
SLI compatibility bits (DX10): 0x000000F5

NVIDIA predefined SLI mode on DirectX 10: SLI_PREREFINED_MODE_DX10_FORCE_AFR

click on "Apply changes" "

I am using the latest nvidia driver 275.50.

sadly nothing seens to work.

Winger

[335th_GRAthos]

Sorry, no idea with tripple SLI, one of my fellow pilots has quad-SLI (2x590) and has the same problem, it does not work...

[Winger]

Originally Posted by 335th_GRAthos

Sorry, no idea with tripple SLI, one of my fellow pilots has quad-SLI (2x590) and has the same problem, it does not work...

I see you use an earlier driver version. Ill try that one out today or ill even try to unmount one of the 3 Cards temporary and see if 2 cards only do work.

Thanks for your feedback.

Winger

[335th_GRAthos]

Originally Posted by Winger

or ill even try to unmount one of the 3 Cards temporary and see if 2 cards only do work.

I was thinking suggesting it to you yesterday but I did not dare

Yes, I believe this would be a good solution to be sure about it.

AFTER you have tried the twin cards and the results are satisfactory, you can also put the three cards in and with the NVInspector change the profile a little bit more: I do not remember by heart but there is a parameter in the profile which defines how many GPUs should be used for rendering the DX10 game. Normaly it is default (auto) but you can change it to one, two, three or four

Good luck!

[Winger]

Originally Posted by 335th_GRAthos

I was thinking suggesting it to you yesterday but I did not dare

Yes, I believe this would be a good solution to be sure about it.

AFTER you have tried the twin cards and the results are satisfactory, you can also put the three cards in and with the NVInspector change the profile a little bit more: I do not remember by heart but there is a parameter in the profile which defines how many GPUs should be used for rendering the DX10 game. Normaly it is default (auto) but you can change it to one, two, three or four

Good luck!

Saw that and manually set it to three all the time. Ill try just to set it to two BEFORE i go on taking the card out physically. Thanks for your feedback and support!

Winger

EDIT: One more question. What fullscreen mode does one have to use. Real or pseudo?

[Winger]

Hmm, no way. whatever i do i always have flickering water. Strage. guess there is no way but waiting for a driver with actual profile for the game.

Winger

[335th_GRAthos]

WINDOW mode!


(you saw my screenshots... )

[Tiger27]

Originally Posted by Winger

Hmm, no way. whatever i do i always have flickering water. Strage. guess there is no way but waiting for a driver with actual profile for the game.

Winger

Isnt flickering an unfortunate side effect of SLI? Have you tried setting super sampling(I believe in ROF that this fixes the flickering) on in nvidia inspector, may kill your fps though.