full mission builder - objects ?

[MadTommy]

Sokol1 great info thanks!!

Originally Posted by Ataros

Does it work in MP? I put AA on tankers in FMB but the guns remain in the water after a tanker is moved in MP mission running on Repka#1 server.

Hmm that sucks!

[FG28_Kodiak]

@Ataros
It not work in FMB you must edit the mis file manually, then they stay on the moving ship. See the mission i've attached.

[Ataros]

Originally Posted by FG28_Kodiak

@Ataros
It not work in FMB you must edit the mis file manually, then they stay on the moving ship. See the mission i've attached.

Tnx a lot! If I have 2 tankers per side it would be as follows?

0_Chief Ship.Tanker_Medium1 gb /sleep 0/skill 2/slowfire 1 /tow00_00 0_Static /tow00_01 1_Static
1_Chief Ship.Tanker_Medium1 gb /sleep 0/skill 2/slowfire 1 /tow00_00 2_Static /tow00_01 3_Static

2_Chief Ship.Tanker_Medium1 de /sleep 0/skill 2/slowfire 1 /tow00_00 4_Static /tow00_01 5_Static
3_Chief Ship.Tanker_Medium1 de /sleep 0/skill 2/slowfire 1 /tow00_00 6_Static /tow00_01 7_Static


Do you know by chance if I can arm blue tankers with Bofors just to give both sides the same weapons?

[FG28_Kodiak]

Yes and Yes the bofors should work for germans also.

[Ataros]

Originally Posted by FG28_Kodiak

Yes and Yes the bofors should work for germans also.

Thanks a lot again. Integrating into my mission for Repka.

Do you know what these parameters mean and how they influence gunnery?
/skill 2
/slowfire 1

And /sleep 0 is probably a spawn delay in seconds?

[FG28_Kodiak]

/skill 2 AI-Level of Ship also influence on AAA acuracy, i think.
/slowfire 1 rate of fire
/sleep 0 How long it takes before AAA gets active.

[Ataros]

Originally Posted by FG28_Kodiak

/skill 2 AI-Level of Ship also influence on AAA acuracy, i think.
/slowfire 1 rate of fire
/sleep 0 How long it takes before AAA gets active.

What I would like to find out is what are the boundaries for these parameters, e.g. can /skill 10 be used or does /slowfire 3 reduce or increase ROF (found out that 0.5 is minimum value for this). Do you have this info by chance?
I am working on a mission fixing various bugs almost every day and just can not try everything by hand )

Installed 2 AA guns onto a tanker with help of your instructions. Works great! Unfortunately after editing the mission in editor again it reverts to default 1 gun. Did you notice this issue? I have to re-edit my mission many times. Do you think it can be done without loosing the 2nd gun?