![]() |
|
|||||||
| Performance threads All discussions about CoD performnce |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I get the feeling you can't optimize this much, the light from each individual flame is simulated on the surface of the aircraft, this takes up resources. Turn it off if its causing you issues.
|
|
#2
|
|||
|
|||
|
I have not this huge increase in FPS.
I guess my high end card have power enough to render this effects without problems. But if you guys have problems with this in your cards you can try disable dynamic lights : Go to your conf.ini and set DynamicalLights=0 Edit: Dont forget that you had to turn off Steam Cloud. Last edited by Buchon; 04-30-2011 at 08:47 AM. |
|
#3
|
|||
|
|||
|
Perhaps you can also try , some off the effects options in the config file.
If you do : Change ONLY one at a time , change it back and then try another. Effects=1 ; you can try 0 , but that would prob negatively effect other things too EffFlags.Light=1 ; this might be the one that you want to try 1st setting it to 0 EffFlags.SpriteRender=0 ; perhaps enable it ? to 1 EffFlags.LightSpritesProj=1 ; 2nd try would be this to 0 EffFlags.LightContextSprites=1 ; ? you can try 0 , but your guess is as good as mine. EffFlags.SWLight=0 ; would leave this one at 0 , looks like software ligthts , this will probably be slow. Last edited by Remo; 04-30-2011 at 11:53 AM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|