![]() |
|
|||||||
| IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
|
|
#2
|
|||
|
|||
|
Issues I've encountered with FMB or objects with FMB, and MP - FMB used for creating MP mission.
1. German industrial building's "hook" error, can't use. 2. Flak attacks seagull's... LOL. 3. Some objects (i'll create a list) are not useable and renders' the FMB unusable (CTRL-z to undo sovles it for now). 4. Spawning planes inside hangers with door's that don't open....... 5. Some spawning planes spin slowly, brake has no effect. Not sure what the issue is, but it also prevents using the rudder to taxi about. EDIT: it's the wind parameters doing this. Although the ground is skiddish at gradients. 6. Briefing other than the mission description is not viewable at any time. 7. Airfield object - creating runway fine.. the airdrome points are another matter. I assume these allow to create spawn points, and taxi waypoints, but you can't spline? so that 0-1-2-3 is sequential so it doesn't work... how to? 8. Road tool.. bugged. Create a point in Engalnd, a second, and they converge over France :s Last edited by doghous3; 04-13-2011 at 04:13 PM. |
|
#3
|
|||
|
|||
|
Ok I tried many things,
Low or high buildings details no effect. Antialiasing high x8 or off no effect. If you play in 1600*1080 on my system the fps start show is scramble and unreadable. With my system 1920x1200 or less make no change to micro stutter. Is this due to my system or other people do have the same results? It is a great game/simulation event with the little problems. |
|
#4
|
|||
|
|||
|
Graphical and FM bug on the Br.20. Level flight with shot off wing and with prop and pistons of missing engine visible.
|
|
#5
|
|||
|
|||
|
I have just upgraded my system from Windowa XP to Window 7 and increased my RAM from 3Gb to 8GB - so have been 'off the air' for a few days?
Today, I finally got back into the COD after a (1 day download from Steam? and 5 days getting the Windows set-up working?) - its a bit slower down in OZ??) and finally started flying the Hurricane. On the new system, I still had to 'dumb down' everything (graphics)? to get the whole thing working at a a reasonable FPS? I am having problems getting 'ATI Catylist' to work in 'Windows 7' ( I would like any thoughts on this?) so I don't think my video graphics are working at their best? I have attached a 'jpeg' showing some of my graphic problems , now that I have upgraded? My graphics were better on my old XP system? Ilya you have to quickly go to '4 Cores' to get everything working properly in this flight sim - sadly members will have to upgrade! System specs. Operating system: Windows 7 Professional 64-bit Motherboard: Gigabyte P35-DS4 Processor: Intel (R) Core (Tm) 2 Extreme CPU Q6850 @ 3.00ghz Memory: 8192MB RAM Pagefile: 1893MB used, 14485MB available Direct X version: Direct X 11 Display: Benq 1920x1200 (32bit) (59hz) Video card: ATI Radeon HD 4870x2 Driver version: 8.831.2.0 Memory: 1768MB See attached jpeg? DFLion |
|
#6
|
|||
|
|||
|
Quote:
This thread is not meant for technical assistance, is titled "Constructive explanation of issues", so describe the issue in a way that it can be reproduced by the Oleg's team, and please don't pollute this thread! |
|
#7
|
|||
|
|||
|
Stefem, thanks for your answer. I am not sure if crossfire has been disabled because I can't access the ATI Catylist control centre in Windows 7. Hopefully, one day I will be able to upgrade my graphics card when I can afford it?
DFLion PS I have now found the right thread to put this in! |
|
#8
|
||||
|
||||
|
I used Searchlight Object "Height Light" in a test night time mission, two at the end of each runway.
The lights can be seen through the cockpit panel which is helpful but not right
__________________
klem 56 Squadron RAF "Firebirds" http://firebirds.2ndtaf.org.uk/ ASUS Sabertooth X58 /i7 950 @ 4GHz / 6Gb DDR3 1600 CAS8 / EVGA GTX570 GPU 1.28Gb superclocked / Crucial 128Gb SSD SATA III 6Gb/s, 355Mb-215Mb Read-Write / 850W PSU Windows 7 64 bit Home Premium / Samsung 22" 226BW @ 1680 x 1050 / TrackIR4 with TrackIR5 software / Saitek X52 Pro & Rudders |
|
#9
|
|||
|
|||
|
|
|
#10
|
|||
|
|||
|
@ dflion...you have agood system there no need to upgrade anymore ..the 4870x2 is a awsome card and is on par with the hd5870..all you need it the right drivers from ATI website ,,download 10.4 ..drivers uninstall old ones and replace with these , they are out dated but work well with the 4870x2 ..try that
As to your photo, i have the same on mine its the game its not finished also..sounds like ati ccc isnt loaded ..hence why you cant get into ccc...i have win7 works ok .. Last edited by JZG_Con; 04-13-2011 at 08:20 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|