Can someone give me hope?

[tf_neuro]

wtf?!?
im not even trying to get my gme to work on gts250! I switched card to a more powerful one that can handle 3x full res.
This whole discussion followed one guy telling me that my low res wasnt low enough for him... and now he's even telling me to play on one monitor (yeah, right...)
It was off topics when he said that 2400x800 isnt low, and it's even more off topic when anyone gets fed up by my posts... that are only trying to explain that 2400x600 is as low as 800x600...

But OK, I'm cutting it here. I should never have answered a post that goes "you have an unrealistic idea of waht <insert object here> is"
Something like that cant possibly end up in any other way than a pointless (off topic) discussion.
My bad. I should have seen that coming.

[Oldschool61]

Originally Posted by tf_neuro

wtf?!?
im not even trying to get my gme to work on gts250! I switched card to a more powerful one that can handle 3x full res.
This whole discussion followed one guy telling me that my low res wasnt low enough for him... and now he's even telling me to play on one monitor (yeah, right...)
It was off topics when he said that 2400x800 isnt low, and it's even more off topic when anyone gets fed up by my posts... that are only trying to explain that 2400x600 is as low as 800x600...

But OK, I'm cutting it here. I should never have answered a post that goes "you have an unrealistic idea of waht <insert object here> is"
Something like that cant possibly end up in any other way than a pointless (off topic) discussion.
My bad. I should have seen that coming.

Apparently you didnt do well in math because 2400x3 monitors is7200 X 600x3=1800
which is the same as 2400 x1800 you call that low?? Oh well I guess some of us just are not good with numbers

[335th_GRAthos]

Just to avoid misunderstanding, I am trying to make you understand that you are missing the point boasting about your three monitors because:
- The game does not yet support three views (left, right, centre) like IL2FB for the time being thus your view is limited by half if you try to fly that wide.
- It is good to have three monitors but not good enough if you do not have the hardware to match the demands.

(from somebody who has bene flying IL2FB on three monitors for the last 4 years...)

[tf_neuro]

Apparently you didnt do well in math because 2400x3 monitors is7200 X 600x3=1800
which is the same as 2400 x1800 you call that low?? Oh well I guess some of us just are not good with numbers

Oh look! We have Albert Fokk'n Einstein, here. Steve Fokk'n Hawking, even!
Listen buddy, you got it wrong right from the start.

Where you got the 7200 from? When did I say 2400x600 x3 monitors?!?. What I said was 2400x600 = 800x600 x3 monitors!

One of the 2 representations in the picture is wrong. Can you guess which one, Math Genius?





@Athos im not boasing anything. This whole discussion spawned from a misunderstanding (see above).
Also, CoD doesnt have the 3-views thing like IL-2 but unlike Il2 you can zoom out pretty much like you do in FSX or RoF. IN CoD the 'magic' key is called 'Manually Adjust FoV'. That gives me pretty much the same field of vision as I have on IL-2 with Use3Renders=1.

- It is good to have three monitors but not good enough if you do not have the hardware to match the demands.

(from somebody who has bene flying IL2FB on three monitors for the last 4 years...)

Exactly. The GTS250 did the trick on IL2 but not on CoD, that's why I got the 460GTX. Happy on 3 monitors now.

[Killa_Joe69]

Originally Posted by Helrza

Killa joe, try these settings in your conf.ini:

[rts]
tickLen=30
ProcessAffinityMask=15
maxTimerTicksInRealTick=20
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=0
DisableIME=0
culture=en-GB

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
SensitivityZ=1.0
Invert=0
SwapButtons = 0

[rts_joystick]
FF=1

[core]
RandSeed = 0
TexQual=3
TexFlags.PolygonStipple=0
Shadows=0
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
LandShading=0
LandDetails=0
Sky=3
Forest=2
VisibilityDistance=4
LandGeom=2
DrawCollisions=1
Water=-1
Effects=2
EffFlags.Light=1
EffFlags.SpriteRender=0
Grass=-1
CordEffect=1
UseFog=0
UseLandCube=1
UseLandConnectedObject=1
LinearObjectManager=1
Roads=1
Sun=1
Clouds=1
EffFlags.LightSpritesProj=1
ShadowMapSize=5
TexFlags.AsyncLoad=1
TexFlags.ShowTexture=0
SimpleMesh.SWTransform=0
SimpleMesh.QuadTreeClip=1
SimpleMesh.InstancingHW=1
EffFlags.LightContextSprites=1
CloudsFlags.Detailed=1
TexFlags.CreateHDR=1
Decals=2
EffFlags.SWLight=0
TexFlags.CockpitOnePass=0
MegaTexture=0
TexFlags.Reflection=0
RenderTargetQual=3
MSAA=4
MeshStatics=2
MeshStaticsDetail=0
SimpleMesh.QTNoCompose=0
MeshFirstLod=0
MeshShowLod=0
SpawnHumans=0
TexFlags.FastTransparency=1




Also refer to the nvidia control panel settings ive posted in my other post. Give them a try and let me know how u go if u can Also, turn the forests completely off in the game if you need another performance boost, and disable your mirror Another setting to disable also is clouds, which you will find in the realism settings gl

Helrza, hope you dont mind me just ripping off your settings It worked like a charm....eye candy is gone but i guess i can live with it while the patches start rolling in. I saw your other post and i also agree with the theory that the shadow really eats up the processing power and RAM memory which is probably giving the majority of ppl on both mid range and high range desktops low FPS

[Helrza]

Originally Posted by Killa_Joe69

Helrza, hope you dont mind me just ripping off your settings It worked like a charm....eye candy is gone but i guess i can live with it while the patches start rolling in. I saw your other post and i also agree with the theory that the shadow really eats up the processing power and RAM memory which is probably giving the majority of ppl on both mid range and high range desktops low FPS

Dont worry bout rippin my settings, i posted them there for u to try Im glad to be of help

[Kristof]

Killajoe, you should try to overclock your cpu. Im guessing its a q6600 right?
I have OC'ed mine from 2.4 to 3.6 easily, I even tried 3.8, but I get memory errors anything over 3.6.