CH Controllers not seen....

[madrebel]

in your c:\users\(name)\documents\1c soft\il2 folder look at your conf file and make sure

[rts]
tickLen=30
ProcessAffinityMask=3
maxTimerTicksInRealTick=20
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=1
DisableIME=0
culture=en-GB

that is set right. if it is and it still doesn't work ... idk.

[123-Wulf-123]

Originally Posted by madrebel

in your c:\users\(name)\documents\1c soft\il2 folder look at your conf file and make sure

[rts]
tickLen=30
ProcessAffinityMask=3
maxTimerTicksInRealTick=20
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=1
DisableIME=0
culture=en-GB

that is set right. if it is and it still doesn't work ... idk.

OK thanks for your trouble, Steam is updating at the minute after an install of Win 7 x64 bit so once it finishes I'll check it out :0

[123-Wulf-123]

OK I have that line ok in my conf., the game is not detecting the controllers.
I am going to re-install all the CH software and Hardware re-boot etc and see how it goes.
I suspect it might be something to do with Win 7 64 bit.

[123-Wulf-123]

Spent several hours installing/uninstalling CH Control Manager etc.....booting/re-booting and all that melarkey.

No joy the came is not seeing my controller axes at all, one or two commands on the JS buttons it responds to but not the Axes.

And please do not tell me to check the axes section........

[15JG52_Brauer]

Wulf - I'm running CH stick, throttle,rudder - not had a problem at all - pm me details of your setup - or I can pm you ts details and chat to work out why mine works and yours doesn't

[CharveL]

I'm having the same problem right now, just trying to find the time to solve it...

[SsSsSsSsSnake]

full set up working herejust to let you know it can work i didnt do anything other than go to controls option and click the required ,i really hope you sort it,

[lensman1945]

Originally Posted by 123-Wulf-123

Spent several hours installing/uninstalling CH Control Manager etc.....booting/re-booting and all that melarkey.

No joy the came is not seeing my controller axes at all, one or two commands on the JS buttons it responds to but not the Axes.

And please do not tell me to check the axes section........

Just updated to Win 7 myself. You don't need CH Control Manager except if you use the MFP. Had me foxed for a while.

[123-Wulf-123]

Obviously you do if you have compiled a map

[Dai-San]

I'm watching this post with interest as I have exactly the same issue with my X52.

Nothing I do will get COD to recognise the Axis or Button inputs. Works fine in every other game.

Hope you find a fix