![]() |
|
|
|
#1
|
|||
|
|||
|
Same problem here... was just about to post when I saw this.
I could have sworn it worked the first time I toggled it... but then never again. And if you find the answer please post it!! Last edited by Saintblu; 04-02-2011 at 11:03 PM. |
|
#2
|
|||
|
|||
|
Same here, mapped but not working! HELP!
|
|
#3
|
|||
|
|||
|
I heard it's bugged like everything else...
|
|
#4
|
||||
|
||||
|
Oh, a polemic!
If you mean the single axe autopilot, it is working! One just has to be patient as a mechanical system with a slow reaction (dampening) is simulated. No instant success like in 1946.
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects ![]() |
|
#5
|
|||
|
|||
|
It is supposed to work with bombers only. No fighters at all.
|
|
#6
|
|||
|
|||
|
Quote:
The reason i'm asking is that i keep pressing the key i have mapped to it but i don't even get the kind of confirmation that i get for other controls (the blue text on the right-hand side of the screen that tells me for example, that i switched my fuel tanks to main or turned on my lights, etc). Maybe it is tied to the realism setting for bombs, preventing us from using it if the setting is on? I'm just guessing here by the way. I'm also very interested to see the implementation you describe, since in the real thing most of the times the manuals advised pilots to trim for level flight before engaging the autopilot and not expect it to work all by itself. I can't wait to start experimenting with some level bombing |
|
#7
|
|||
|
|||
|
yes please, i would also like to know how exactly to use it
|
|
#8
|
|||
|
|||
|
Have not tried it, but from 1946 experience I remember that the name of the actual command was not what people expected.. the translation was off and people were thinking they were enabling one thing when they were actually using another..
__________________
MSI P67A-65D Intel i5 2500K @ 4.2 Gig 8 Gigs Corsair DDR3 1600 RAM XFX 6970 Video Card Win7 64 Bit Home Ed ATI 12.3 Driver Package WD Caviar 7600 RPM HDD ATI CCC at DEFAULT settings |
|
#9
|
|||
|
|||
|
let us wait for this guy again. for further explanations.
|
|
#10
|
||||
|
||||
|
Ok, here is "this guy"
In my game its in german, i'll try to translate correctly The keys are " Einachsiger Autopilot - Modi durchschalten" single axis auto-pilot switch modi "Einachsiger Autopilot - Kurs nach links anpassen" single axis autopilot - adjust course to the left "Einachsiger Autopilot - Kurs nach rechts anpassen" single axis autopilot - adjust course to the right You trim the plane for level flight and switch on the autopilot. Now you adjust the course until the autopilot - instrument has the moving marking under the center of the 3 fixed vertical markings. Now let the plane settle. With minuscule course adjustments you can steer your plane relatively stable. Your joystick is still active! leave it alone! Now go to bombardier, do your adjustments and look as far forward as possible. Do your course adjustments very careful and wait for the plane to settle. good luck!
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects ![]() |
![]() |
| Thread Tools | |
| Display Modes | |
|
|