Saitek X52 Pro Throttle axis not working

[scorpac]

Originally Posted by Sauf

Have you got anthropomorphic turned on? My x52 had small spikes which made the game think my hand was using the trim wheel or pitch slider so couldnt use anything else.

same problem for me... radiators or even the throttle is jumping sometimes.. for some reason

[Wutz]

This problem is also the case with the Saitek EVO I have the anthropomorphic turned off but only the throttel is working, all the rest is not being recognised at all. On IL2 1946 this joystick has been working fine for years, but on CoD no joy. If anyone has a tip?
As otherwise the game runs pretty good on my computer, but having to fly by keyboard alone is not really ideal....

[JG53Frankyboy]

as long there is no tolerance filter included , the "two hand control" will stay disabled. Causes too much proplems.

Lets wait what the most onlineservers will use...

[SEE]

As a temporary fix to use Anthropomorphic with my Saitek X52 Rotaries I have used SST to configure the Rotaries into bands for elevator and rudder trim. The middle band is set as a dead zone in the controls menu and the two outer bands have been assigned key strokes with a repeat function using the 'advanced keystrokes' menu.

I rotate the control in the desired direction and once the trim is correct I rotate the dial back to center (the dead zone) and the throttle becomes active again. It's not ideal but at least I can get an idea of using the anthropomorphic feature.

[pedalracer]

Originally Posted by SEE

As a temporary fix to use Anthropomorphic with my Saitek X52 Rotaries I have used SST to configure the Rotaries into bands for elevator and rudder trim. The middle band is set as a dead zone in the controls menu and the two outer bands have been assigned key strokes with a repeat function using the 'advanced keystrokes' menu.

I rotate the control in the desired direction and once the trim is correct I rotate the dial back to center (the dead zone) and the throttle becomes active again. It's not ideal but at least I can get an idea of using the anthropomorphic feature.

Hello

I still do not get that. Can someone or the original poster be so kind to post a screenshot of the SST settings that work?

I assume you are setting up all stuff exclusively in SST, right?



I would be really happy about that. Thank you very much since I still have no real flight pleasure cause I am stucking with my X52 PRO setup.

[albx]

Originally Posted by pedalracer

Hello

I still do not get that. Can someone or the original poster be so kind to post a screenshot of the SST settings that work?

I assume you are setting up all stuff exclusively in SST, right?



I would be really happy about that. Thank you very much since I still have no real flight pleasure cause I am stucking with my X52 PRO setup.

why you want do that? just assign the axe you want use to the control.