![]() |
|
|||||||
| Technical threads All discussions about technical issues |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Pilot and Plane customisation screens turn black after a few seconds.
My Specs are: Antec Nine Hundred Two Case, Sapphire Radeon HD 4870 Vapor-X 2GB, Akasa PowerMax 850W Power supply, Asus P6T Motherboard LGA1 366 Intel X58 ATX RAID SA, Intel Core i7-920 D0 Step Processor (8M Cache), Corsair XMS3 3GB (3x1024M B) DDR3 Memory 1600MHz, Noctua NH-U12P CPU Cooler SE1366, LG GH22NP20 22x DVDRW/ RAM, Seagate Barracuda 7200.11 1.5TB Hard Disk Drive 72 (Two), Windows XP Home Edition. updated to SP3 No overclocking done and everything running at stock speeds |
|
#2
|
||||
|
||||
|
Are you using the latest Catalyst drivers (11.3)? Using a very similar card and no issues here.
|
|
#3
|
||||
|
||||
|
Cockpit Padlock don't work properly. It locks on both enemy's and friendly planes.
__________________
I7-3930K CPU w/ Corsair H60 liquid cooling. 16Gb Corsair Vengeance 1866mhz. Asus P9X79 Deluxe Motherboard. Asus GTX680 2Gb SLI Auzentech Home theater 3D Soundcard. Corsair HX850 Modular PSU. Win 7 x64 Ultimate TM Warthog HOTAS. TM Cougar MFD's. Saitek Flight Pro pedals. TrackIr 5. Samsung Syncmaster 2770FH LCD. |
|
#4
|
|||
|
|||
|
Turning forests to very low seems to have the same effect as turning forests off.
|
|
#5
|
|||
|
|||
|
The wee black line issue for me as well (whatever that is?)
|
|
#6
|
||||
|
||||
|
Select a quick mission, choose a different aircraft to the default, then click fly.
Exit the mission, then click fly again. Even though the menu still showed the non-default aircraft, you will start the mission as the default, even if you specifically go into the aircraft menu and select the aircraft you want again before clicking fly. The only way to change this is to select another mission and then the mission you want and select your aircraft again, or select another aircraft before selecting the one you want. |
|
#7
|
||||
|
||||
|
Hi,
I am using build : v.1.00.13820 On the Calais bomber quick mission I have experienced the following: -Skins not showing on the 109 E/EB -Flaps and Gear not deploying -When crash landing - the 'crash/taxi' sound continues even when the aircraft stops moving. In general I have the same issues mentioned above, stutter, controller issues, fps drops etc. Also, I find TrackIR is acting a bit strange(laggy), but this may be due to stutters/fps, or my set-up. I am happy to keep testing, Thanks. ================================================== ======== Specs: -Processor: Intel(R) Dual Core(TM) i7 CPU M 620 @ 2.67GHz -Manufacturer : TOSHIBA -Model: Qosmio F60 -System memory: 4.00 GB RAM -System type : Win 7 32-bit operating system -Display adapter:NVIDIA GeForce GT 330M Total available graphics memory :2296 MB Dedicated graphics memory: 1024 MB Dedicated system memory 0 MB Shared system memory :1272 MB Display adapter driver version: 8.17.12.6776 Primary monitor resolution: 1680x1050 DirectX version : DirectX 10 -Display :22" Acer monitor -Controller :Saitek X52 -TrackIR5
__________________
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|