Central MS FFB2 topic - repair, settings and mods

[KG26_Alpha]

Ahha a XFFB52

As you know with the beam permanently broken the DC servos will be on all the time the sticks powered up.

I'm not sure what you mean by "centre tension all the time" as my MSFFB2 progressively produces resistance as you head to stall point then buffets the stick at stall, the rest is smooth loading of the stick forces as the control surfaces load up when manoeuvring depending on speed and AoA.

Low speed "limpness" is realistic of low resistance as there's less air pressure on the aircraft's control surfaces.

I'll have a look at what you want in FFE, but it seems strange to want high speed at low speed force across the range.

[Sully_pa]

Ahha a XFFB52

LOL Never thought of that .

Low speed "limpness" is realistic of low resistance as there's less air pressure on the aircraft's control surfaces.it seems strange to want high speed at low speed force across the range.

I know ...maybe I'm not looking for high speed but something in the middle ... I was messing with the editor but no matter what I do I can't seem to get it. Just a little more/some stiffness/tension at idol .... Thanks for looking into it .

As you know with the beam permanently broken the DC servos will be on all the time the sticks powered up.

I keep it unplugged unless I'm using it. As I imagine it could wear it out faster.

Thanks again.