![]() |
|
|||||||
| IL-2 Sturmovik The famous combat flight simulator. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I was looking at the cards you suggested and I was wondering how to tell if they are compatible with my computer, so many options.
I noticed that my card specs says that it is a PCI Express 2.0 x16 bus interface Does that meen that ANY graphics card with that spec will work in my comp or does the whole DDR3 or DDR4 thing meen something too. I know I want a 1GB card. and if I gotta spend alil over 100 bucks thats cool with me. You asked about what resolution I plan to play. I really dont know what that meens. sorry THanks for the reply! |
|
#2
|
|||
|
|||
|
Quote:
Quote:
Flyingbullseye |
|
#3
|
|||
|
|||
|
Just checked, I am running at 1920x1080 , windows (recommended).
How do I know if my "power supply" can handle something? |
|
#4
|
|||
|
|||
|
I just read up on the diamond 4870 and it says it takes 2 PCI-express slots and 2 power supplys.
How do I tell how many slots I have on my mother board and power supplys? ,mabee there is a spot you can direct me in windows ..... before I have to open up my computer to have a Look around |
|
#5
|
|||
|
|||
|
Technically the 4870 doesn't actually take two PCI-e slots. Some motherboards have two PCI-e slots close together and some graphics cards cooler (4870) are large enough to cover the second slot. That is what is referred to taking two PCI-e slots.
As for the power supply that is also talking about using two 6 pin connectors from the one power supply in your PC. Some have two connectors, some like mine just have one. Can't miss it, is the only connector with 6 pins, mine also had a PCI-e tag on it, made that easy. Unless you have something that gives you the specs on your PC, you're going to have to open up the thing and have a look for yourself. Its not hard you should have a side panel you can slip off once you take out the back screws. If anything the owners manual should show you what to do. If you find you only have one 6 pin PCI-e connector I'd suggest the GTS 250. Fairly cheap and is more than enough for the sim in all its glory. Flyingbullseye Last edited by flyingbullseye; 05-29-2010 at 06:04 AM. |
|
#6
|
|||
|
|||
|
Wow I may have just answered my own questions here. I been doin alot of research and it looks like my inspiron 570 has 1 slot for a pci-express x16 graphics card. the system also comes with a 300 watt power supply.
the 4870 wont fit cause it needs 2 open x16 slots. ...But the HD 4850 will fit cause it only needs one! lil problem is I would need to get a bigger power supply, exactly a 450watt or higher with a pci-express x16 hookup on it. runs close to a hundred bucks for that and a lil over a hundred for the 4850 card. Lol I guess getting some more graphics isnt so easy. I wonder how hard it is to change a power supply.... So you said that the 4850 will max out the sim at 1640x 1050. Thats excellent news. You mentioned something about AAx2 and I dont know what that meens. would you mind elaborating on that. I think through research and your suggestions (thanks) I am able to make my choice on the 4850. |
|
#7
|
|||
|
|||
|
no the HD4870 only needs 1 PCI-E 16x slot, the card has a super big heat sink, so its thick enough that blocks the slot directly underneath it, be it a PCI-E slot or an ISA slot, or a nintendo cartridge slot... anyway, u'll want at least a 600w power supply to not have to worry about frying it all, even with a 4850.
here's a 4870 ![]() and a 4850 ![]() notice the 4850 is a lot thinner, so it only takes the space of one card, it being slow enough that it doesn't need the bulky heatsink. where as the thicker 4870 is so big cause of the extra cooling it needs, that it takes the space of two, even though they both only plug into one slot. Last edited by AKA_Tenn; 05-29-2010 at 12:40 PM. |
|
#8
|
|||
|
|||
|
Depending on the configuration of your tower it can either be easy or a royal pain in the rear. My power supply I found out was about 1mm too large for the slot in my tower. That was a lot of fun trying to squeeze a solid object into another solid object neither of which has any give. Its in but has a sweet scrap mark on the top of it.
As long as everything is connected when your done you should be good to go. With the exception of the graphics card everything else uses the same type 4 pin connector so you can't mess it up. Good luck! Flyingbullseye Last edited by flyingbullseye; 05-29-2010 at 02:33 PM. |
|
#9
|
||||
|
||||
|
It may be worth trying the default card first, as I can play Il-2 maxed on an ATI 4650 and a 2.00 dual core
|
|
#10
|
|||
|
|||
|
It might be an even better idea to get an Nvidia card.
IL2 1946 will be less hassle with an Nvidia GPU. Have a look at the ATI threads around here they have driver problems and graphics anomalies in IL2, flashing props and rainbow flak with purple/blue cockpits. and some have perfect mode water issues. Nvidia have a problem with visible rings in the water on perfect mode settings when its foggy. Have fun. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|