Control sensitivity

[Extreme_One]

Originally Posted by Formula88

OK, I got it figured out! I was on the right track but what I failed to realize was that my 1946 was on a fresh install and I hadn't set up my controller for it yet. After I set up my controller in 1946 I went into its config file and sure enough the proper values were now in there. I simply copied and pasted from the 1946 config to the CoD one. Here is what it looks like:

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 1 6 10 15 22 33 44 58 72 100 0
1Y=0 1 6 10 16 23 31 43 56 73 100 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0
1RZ=0 1 4 8 13 21 28 39 52 69 100 0
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0

This, everyone, I have confirmed to work! You need the 1X values for it to work not the X values, the axes with the 1 infront are what windows uses to set the joystick sensitivity.

Perhaps this should be stickied so everyone can benefiet from this.

Confirm working here.

Controls are now far smoother. I was having real trouble with gunnery due to the rudder feeling way too twitchy, now it feels as smooth (maybe even smoother) as flying in IL21946.

Thanks for finding this. Now we just need the devs to create an ingame interface so we can tweak it ingame.