Friday 2010-12-10 Dev. video update and Discussion

[Richie]

Originally Posted by 334th_Gazoo

These are my thoughts as a steel fabricator. Using an oxygen acetylene cutting torch as an example... A very rich mixture of gasses coming out of the torch is Orange with much Black smoke. A high oxygen mixture is Blue White.Setting the mixture At the optimal point between an Oxidising flame and Carburizing flame is ideal.

I believe that effciency in an engine may be measured thus, and exhaust coulor be matched accordingly.

Thankyou for your patience

334th_Gazoo

The point is.. Is it running Lean or Rich?

Right. If you look at all of the engines in the videos...in they dark... they're all blue. By the chart that was put up if the mixture is right and the engine is running perfectly the flame should be blue with a lick of red at the end. If you stood right up close maybe you could see some red.

http://www.youtube.com/watch?v=QhFAw...layer_embedded

http://www.youtube.com/watch?v=Xs_qt...layer_embedded

http://www.youtube.com/watch?v=4ZzvKCQwWj0