Quote:
Originally Posted by Momod
For testing I set up a mission in full mission builder, for 1000ft it was set up to spawn at 1500ft and 490kmh as soon as it spawned engage autopilot, wait till it settles down and gets up to max speed then disengage autopilot, still flying level adjust radiator and revs then shallow dive to 1000ft hold it level for 20 seconds while any speed from diving has bled away then press pause and take a reading of the speed.
~S~ 56RAF_Rumba
|
There is one thing you are missing. You need much longer than 20 seconds for an accurate measurement. Put the game on 2x or 4x speed (trimmed properly of course), hold the altitude and then you can get a very accurate reading. 20 seconds is not long enough, it will hold speed from a slight dive for longer than you think, throwing measurements off.
Anyway... our figures are the same.
Oh another thing worth noting is that all the aircraft (including 109 a little but by far most notably RAF planes) perform way better with CEM off, completely differently actually. Much closer to real life performance.
Perhaps with the game in it's current porked state ATAG can try turn off CEM to give the reds a bit of a chance? Just a thought.