Quote:
Originally Posted by jermin
Engines with MW50 enabled overheat way too fast.
Historically, MW50 can be used continuously for 10 mins. After that, the engine needs to rest for at least 5 mins before enabling MW50 boost again. But in 4.11, the engine will overheat about 53 seconds after enabling MW50. Well within 3 minutes, the engine will be cooked up.
|
Was it a cold or hot engine? Was it level flight, steep or moderate climb? I just tried out the Bf 109 G-10, default armament but only 60% fuel load, radiator fully open. I wanted to use the MW50 to take off and climb. The overheat message popped up roughly 2min 30 seconds after setting throttle to 110%, which I did shortly after the plane started to move. I didn't climb optimally, but I made it to about 3200m altitude.