Does anybody know whether there is extra drivers for these devices. Ive looked for hours and cant find anything. (No disc either). Secondly the two progams i did download were
GFconfig Version Version 2.03 Build 1. Absolutely useless unless you want microsoft flight sim.
However this certainly recognises the 3 components.
The other program was GoFlight Key Mapper Version 1.5 Build 83.
Again this recognises the 3 components. Select a control and that controls light will blink. You can then easily "set keys" using the keyboard.
Here is the GF RP48 .gfk file (mapping file").
[GFRP48_1]
K1+=LSFT+AUXHOME
K1+D=Gyro Compass
K1-=LSFT+AUXEND
K1-D=Gyro Compass
K2+=LSFT+AUXINS
K2+D=Course Setter
K2-=LSFT+AUXDEL
K2-D=Course Setter
K3+=LSFT+AUXUAROW
K3+D=Sight Distance
K3-=LSFT+AUXDAROW
K3-D=Sight Distance
K4+=LSFT+AUXLAROW
K4+D=Adjust Sight Left
K4-=LSFT+AUXRAROW
K4-D=Sight Adjust Right
S1+=TAB+LCTL
S1+D=Send Message
S1-=
S1-D=
S2+=LCTL+Q
S2+D=Flash Net Stats
S2-=
S2-D=
S3+=`
S3+D=Toggle Net Stats
S3-=
S3-D=
S4+=
S4+D=
S4-=
S4-D=
S5+=
S5+D=
S5-=
S5-D=
S6+=
S6+D=
S6-=
S6-D=
S7+=
S7+D=
S7-=
S7-D=
S8+=
S8+D=
S8-=
S8-D=
And the same in the options section in the cliffs of dover.
And the actual from the ini file. Just the important section
[HotKey pilot]
Joystick3+Key1=trigger1
Joystick1+Key1=motorcomp_stop
Joystick+Key1=wheelbrakex
Joystick1+Key8=aileron_0
Joystick+Key15=uc_up
Joystick3+Key0=trigger0
Joystick1+Key0=enginei01
Joystick1+Key7=mag0_on
Shift R=ruddert_left
Shift G=site_dimmer
Shift E=elevatort_nup
Joystick1+Key6=elevator_0
Joystick+Key13=uc_down
Shift A=aileront_left
Alt R=ruddert_right
Joystick1+Key5=oilrad_minus
Joystick+Key5=MouseControl
Shift Insert=peilzeiger_p
Alt E=elevatort_ndown
Joystick1+Key4=oilrad_plus
Shift Down=site_dist_minus
Shift Right=site_side_right
Alt A=aileront_right
Shift Up=site_dist_plus
Joystick+Key11=thtl_wep
Shift Left=site_side_left
Shift Home=directionindi_p
Shift End=directionindi_m
Shift PageDown=altimeterknob_m
Shift PageUp=altimeterknob_p
Shift Delete=peilzeiger_m
Joystick+Key3=wheelbrakeltx
Joystick1+Key10=rudder_0
Joystick1+Key2=tankselector0
Joystick+Key2=wheelbrakertx
Joystick1+Key9=mag1_on
I have also sent an email to go flight, and posted on their forum which at this moment over the xmas period silent.
I did notice this.
for
K1+D=Gyro Compass
K1+=LSFT+AUXHOME
and
Shift Home=directionindi_p