Lubricating my joystick
 

I have an X52 Pro js..there is a slight frictional resistance, a "grab" when I make small adjustments to my flight path and in formation flying. I was thinking of WD40 but do not like the perfume odor (except in the garage) and also silicone grease on the spring and dished baseplate. But the actual rubbing may be down the hole at the base of the stick. Amy advice welcome..many thanks in advance. John

Im sure you figured something out by now, but try silicone spray. After a couple weeks, my x52 has worn in to where it doesnt need any lube.

Thanks for reply..one guy described it as "stiction" which really fits. I think it is the rub on the lower disk..I use a cue tip and lithium grease and have tried silicon spray..glad to hear it works itself out as I like the x52 pro setup. I called the Saitek tech number before posting this thread..I talked with a lady with quite an accent and she had no tech information but did say they would exchange it for another. After a few days further use I felt another would do the same as it is in the design...but sure wanted to talk to a techie in Cali.
It bothers me when making small incremental movements..I must push to overcome friction, must recover, and would much rather have the smooth feel of a real ac in minor movements..not that I have flown a real one!
I wanted to avoid any contamination of whatever is below the stick so use grease, minimal on a swab! I did order the x65, kept it two hours, and returned it. It does not move, it transmits signals that give control cues..and it is very long..I meant to write Saitek suggesting they advertise it for guys with big mitts. I would need to release it to jump up to hats and buttons. Worse than "stiction"!! Appreciate your experience.

I use vasaline. I used to use WD40 but as you mention it chokes the life out of you. You can vurtually use any synthetic grease. I would not use a spray as the stick is not designed to resist that kind of ingress. ;) If you only have a spray, spray it on a cloth first then wipe on your stick.

I have never seen such absolute FILTH in all my days!

Have you no sense of decency??????? ;)

Try not to get all excited Brighton boy lol ;)

Hatter..you remind me of a visit to Hawai years ago. I sat on the sand as my wife splashed in the water..she started arm signals..look to the left..I did..2 topless young ladies were moving into my line of vision..I was, like you, filled with Rightous Indignation and Outrage..so I Stared at them witherlingly!! I showed them all the way past until a 14 old boy slid up onto the sand on his surf board, looked up at those Naughty Bits...and had an Epiphany Moment..that I envied!! Cheers..never miss the chance to give someone a laugh!

-using a candle here..on the "base-disks".
Easy as that..

~s~:)

Also using an X52 pro here and I fixed the sticking by tying thin string around the spring. Used 2 strings to compress the main spring enough so that the tension eased up a bit.
It made the resistance lower and removed the sticking completely.
Tried graphite and grease before but those never worked as good, are messy and lost their effect rather quickly.

I found that the sticking on my X-52 was at the upper lip of the, "dish". I used chap-stick around the edge and nothing down in the dish (to prevent it from gumming up with dust and cat-fur). It was so easy I could even touch it up in flight.

I also did what Warhound did on the spring except I used a couple of garbage bag ties. It was easy to adjust and, once again, I could do it in flight.

That worked great for about over a year until one day my X-52 suddenly impacted the wall at a high rate of speed. Nothing worked very well after that. So I got a G-940 and bolted it into my cockpit so hopefully it won't meet the same fate.

--Outlaw.