Trim in Spitfire
 

Hi
After the last patch I can't trim Spitfire at all.Antopomorphic Control doesnt change anything I have no problems in any other plane just Spit.Anyone else experiencing same problem? Is there something I missed? I'm using G940 and have trim maped to axis on my joystick

Can't you? It's weird, before patch I couldn't trim 109 and now I can. Spitfire trim works as well...

Weren't 109's trimmed by groundcrew only and there was no trim control by the pilot? Certainly for rudder trim anyway, at speed in a dive Eric Brown commented how you had to stamp on the rudder bar to stay trimmed.

Trim on the spit works ok for me, however I did have a problem when reassigning keys with the new assign not being recognised, yet after reassigning again and a bit of trial and error I got it to work i think you will find tho that only rudder and elevator trim works on spit.

elevator is what I need I've been flying 109 and Huri just because I can't keep Spit in level flight specially with G940 and no FFB and shocking centering force in COD.btw it doesn't even work by using clicable cockpit

did you?
 

did you save your key config file before the patch? If yes load a old keysconfig file and voila it is done.;)

I've noticed the wheels in the spitfire aren't moving when trimming but I can most definately trim elevators and rudders. When i trim elevators I see the little dial move. Not the trim wheel but the gauge that says how far you have trimmed nose up or down.

I have all realistic options on except antromorphic and limited ammo.

Must be something on your end :/

I have also G940. Have you checked in the axes tune options if the trim dials work? ie. the input -> output is the same?

I saved the file before the patch.Axes work because I can trim 109 and Hurricane but not the Spit and I can see axes moving in settings.I'll try to reinstall the game and see if that helps.It drives me crazy