LOD problem solved, a.k.a. disappearing contacts!
 

Hi all

Searching in the conf.ini file (inside of \My Documents\1C SoftClub\il-2 sturmovik cliffs of dover) I found several lines refered to LOD. After some research it seems that changing MeshShowLod=0 to 1 solves the problem. The line is near the end of the [core] section.

Before:

http://i242.photobucket.com/albums/f...shshowlod0.jpg


And after:

http://i242.photobucket.com/albums/f...shshowlod1.jpg

if htis workds would bd a big + on my list.

well done!

Good work, will test.

Worth a try.

If this works then it needs to be a sticky or added to a solutions sticky :)

This is major! Certainly worth a try. Thanks for sharing!

Definitely gonna have to try this out.

Thanks!

HR_Nagflar,
Thanks for that, off to experiment.
What affect do you think the rest of that section might have;

"MeshStatics=3
MeshStaticsDetail=1
SimpleMesh.QTNoCompose=0
MeshFirstLod=0
MeshShowLod=1"

I'll not touch the others, but in particular, perhaps, MeshFirstLod=0 might work in unison with MeshShowLod=1 .

Again thanks.

A briefly test with "German Attack Bridge" mission confirm this - the DOT no longer disappears momentarily at ~3 KM.

Sokol1