Un-killable. (Hero status AI)
 

Hi

Great work on v4.11 much appreciated.

One small bug/feature I have consistently found is the fighter pilots AI seem to have a strange DM, bomber AI seem to die easy enough but the fighters have a strange anomaly.

Testing offline with Arcade=1

I hit this one a few times in the pilots body from my tail gun I switched to his ac to have a look at the hit points and found him with one in the eye, he carried on and shot down my aircraft and damaged a couple more before making a perfect landing seemingly unaffected by the fatal hits to him.

Nothing wrong here. And that's old, really. The arrow does NOT show the bullet path. It shows the bullet hit vector at the moment of impact. Here you can see, your bullets hit the windshield, which is armored glass. Since pilot isn't dead, it's safe to assume, the bullet did not penetrate the armor.

Yep I remembered that

I should have said I was in a Betty tail gun.

It must be very tough glass then thats a 20mm hit to the glass.

Well, it could be HE shell, so the armored glass could well withstand such hit. Actually, it was designed to stop 12,7 mm bullets, which IMO has higher kinetic energy, then 20mm HE shrapnel.

Either way, pilot wasn't hit here, despite the impact vector image goes right through him.

Thanks I forgot they only show vector and not penetration/damage.





.

Don't HE rounds show a starburst pattern in Arcade mode?

AI Landing Shyness Bug
 

Was landing shyness of AI allready mentioned?
I creatded missions where I'm part of a flight ready to start. the rest of my flight is allready in runway 1, I need to Taxi.
Another flight (incomimg reconaissence) has to land first on the parallel runway 2 (Pacific islands map 90-270 runways on northern island) before we can start.

But the aircraft supposed to land won't do so. Rather circle around like drunk skanks on a fair until fuel is over then eventually land or mostly crash.

If I remove the other AC of my flight and don't move from my position at the hinterlandiest part of the Airfield, they mostly land, but allways circle around a few times.

I can't force them with 2 or 3 waypoints just to fricking land straight without just whimpy-pimpy around fpr a while.

Its just for the immersion of seeing them touch down before you cross the runway and join your flight (iE starting eastwards)

AI planes are sensitive to other planes and/or vehicles near their intended touchdown area. You have both near that area.

I suggest moving your aircraft taking off to the other runway...but not changing their takeoff direction. Then, have the AI planes land on the runway you were originally taking off from.

The second alternative is to simply have your planes take off from the other end of the runway. In any event, you don't want your flights sitting on the end of the runway that is near the touchdown area of the returning planes.

*BTW, are you using 4.11? You no longer need to use the old workaround of using vehicles to temporarily 'block' a flight from taking off. In 4.11 you can simply delay the takeoff of a flight, even after it has spawned.

Also, you seem to have other issues as there was an explosion on the runway at the start of the mission.

One more thing....in 4.11 you can now instruct flights to land 'straight in', without the normal circling. However, you still need to clear up the 'sensitive' area near their touchdown zone.

In all, you still have a lot to do if you want everything to play out your way.


Aviar

Thats what I meant to be reported as a bug
It does not change the shy beaviour and my intention of the mmersion was that you have to check, that yousee him coming in and wait for clearance.
I hope this will change with 4.12 when we all together taxi for our takeoff. Also here is my intention not to have them alligned in the old fashioned way but have them stowed offset. Just for immersion.
Yes but then I have the immersion-killing bug, that they start their engines and immediately pushing full throttle without warm up. If I block them, they start their engines and have usual warmup time or their props allready running. The C47 I use as a blocker (the tanks or follow me jeeps did not work), shoud be available as invisible Aircraft or a vehicle should work as a blocker again.
Thats the version of the mission where I used a Tank as blocker, that does not work.
Thats what I did not understand in the Guide, now I Know, thanks. However, since the (in my eyes) sensitivity bug exists, it does not make a change at all.
My report intended to call this a bug and to reduce the size of this area even to make accidents possible, like real.
I'd love to, if I could, but my programming skills are not existing anyway to join up and help.

I have a problem with my Quick mission builder because it shows me a blank screen.