negative, I've checked all controls... now i'm flying in window :/

Minor graphic glitch with the Avia B-534. Canopy open, seat raised position:
http://i958.photobucket.com/albums/a...k/grab0019.jpg
Weird low-res iron sight superimposed on the proper one. It goes away when you turn your head.

ahm caspar??

so, can u help me with my problem??
or some other guys??

cya :(

No bug (I think) I just need help with the instructions for TrackIR and what actually goes in the conf.ini.

Instructions are:


I added the following lines to my conf.ini at the end of [HookView Config]:

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=50000.0
Speed=6
LeanF=1.0
LeanS=1.0
Raise=1.0

I only get 2DOF and yes, I checked to make sure I wasn't in gunsight view.

Could someone post their lines to the conf.ini so I at least have a starting point ?

Thanks

TrackIR 5 worked for me without any need to add anything to conf.ini - I've not got LeanF, LeanS or Raise set at all.

I have:

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6

Works fine for me. Are you sure your profile for IL-2 has the other axes enabled?

Fw 190 A8 Mistel
 

Hi !

First I would like to congratulate all DT members involved in the 6Dof addition, specialy for the Fw 190; guys you did a very nice job ;)

I would like to draw your attention on the fact that since the Fw 190 A8 has a "flat canopy" and as the Fw 190 A8 Mistel share with the A8 the external 3D, we have, inside the Mistel cockpit the "Late canopy", the same as the A9 now so it don't match at all... :rolleyes:

I think that the mistel should now have the same canopy that A8, exactly what I made in my Fw 190 & ta 152 Pack :)

Best regards !

Thanks for the help guys. It was really working before but since I couldn't lean in real close to read the instruments I thought something wrong. My TrackIR profile I use for other sims and is still okay. Will have to mess around with it more.

My thanks again !

I solved the problem by using my UP3-conf.ini.

Regards,
der Blaubär

Hellcat F6F-3
two very little holes (right and left)
http://img-fotki.yandex.ru/get/4700/...6ebb5d_XXL.jpg