Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik (http://forum.fulqrumpublishing.com/forumdisplay.php?f=98)
-   -   Anyone with problems with ATI drivers read this. (http://forum.fulqrumpublishing.com/showthread.php?t=13117)

mrclean92124 08-05-2010 07:54 AM

Solution!!!!!!!!
 
@)(#$&@)($*U_#U*(@+)#U@)$

OK, after searching, and more.... http://forums.amd.com/game/messagevi...hreadid=136052

The solution is found, steam overlay causing the glitches.. 10.7 and 10.6 i'm sure both have good rendering in GL for IL-2... issue is steam overlay causing all my problems o(

Solution is to go into IL-2 properties in steam, and uncheck the "enable steam community" checkbox.

Fired up IL-2 and its eye candy once again.. I love this game...and thanks for this thread...I'm off to steam forum to post my solution.

Cheers.

Xilon_x 08-05-2010 09:50 AM

No sorry man i don't have in this moment X-FIRE interface for online game
i disabilited AI mode but the problem remain.
repeat i have ATI HD5970 il-2sturmovik in exerlent mode is on but land detail is low sea is 2 if i put graphyc detail to perfect mode all screen trasforming in black color.

Flanker35M 08-05-2010 10:47 AM

S!

Xilon..You do not get best water under Excellent. You need to run OpenGL and Perfect mode (Hardwareshaders=1 in conf.ini under Render OpenGL).

Flanker35M 08-05-2010 10:50 AM

S!

I made some changes to the conf.ini, in red color. Try out and see.


[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=0
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0

TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=0

HardwareShaders=1
Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3
Sky=2
Forest=3
LandShading=3
LandDetails=2
LandGeom=3
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=17
Water=1
Effects=1
ForceShaders1x=0
PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0

Blackdog_kt 08-05-2010 03:33 PM

I have held up on updating my drivers due to this for a long time. In fact, i think i have the 9.11 version from the boxed DVD that came with my GPU since last Xmas, when my 4870 got fried and i replaced it with a 4890 (hurray for MSI 3 year warranty :grin: )

I have also seen on the Spits vs 109s forum that succesive driver versions sometimes break things that previous ones fixed. The general consensus there seems to be that 10.6 is problematic, 10.7 is good and 10.5 is the best overall for IL2.

I have downloaded versions 10.5 and 10.7 but haven't installed them yet. So my questions is, keeping in mind that i don't necessarily need the latest driver no matter what, which one should i install? I'm leaning on 10.5 to be honest.

Xilon_x 08-05-2010 04:08 PM

yes yes good Flanker35 now the sea color and graphyc is goood tank you i modifichet the con.ini TANK YOU

Xilon_x 08-06-2010 01:35 AM

1 Attachment(s)
Attachment 3003
i enter in hyperlobby online sistem and i join in a server after il-2 start loading procedure the texture change and i have this problem.


if i play in private sistem and not online i not have this problem.

maclean525 08-06-2010 01:57 PM

Quote:

Originally Posted by Xilon_x (Post 173734)
Attachment 3003
i enter in hyperlobby online sistem and i join in a server after il-2 start loading procedure the texture change and i have this problem.


if i play in private sistem and not online i not have this problem.

Which driver version?

Xilon_x 08-06-2010 02:46 PM

i have driver catalist 10.7
i have this message
WRAPER DX:
IL2 DirectX8 Wrapper LogFile.
1C:Multimedia.Dev/Maddox.
=============================

Choose Pixel
Set Pixel
CreateContext...
Driver: aticfx32.dll
Description: ATI Radeon HD 5900 Series
Version: 656396
WHQL Level: certified, but no date information is available.
Modes:
640x480 16 bits
640x480 32 bits
720x480 16 bits
720x480 32 bits
720x576 16 bits
720x576 32 bits
800x600 16 bits
800x600 32 bits
1024x768 16 bits
1024x768 32 bits
1280x720 16 bits
1280x720 32 bits
1280x768 16 bits
1280x768 32 bits
1280x800 16 bits
1280x800 32 bits
1280x960 16 bits
1280x960 32 bits
1280x1024 16 bits
1280x1024 32 bits
1360x768 16 bits
1360x768 32 bits
1400x1050 16 bits
1400x1050 32 bits
1440x900 16 bits
1440x900 32 bits
1600x1200 16 bits
1600x1200 32 bits
1680x1050 16 bits
1680x1050 32 bits
1792x1344 16 bits
1792x1344 32 bits
1800x1440 16 bits
1800x1440 32 bits
1856x1392 16 bits
1856x1392 32 bits
1920x1080 16 bits
1920x1080 32 bits
1920x1200 16 bits
1920x1200 32 bits
1920x1440 16 bits
1920x1440 32 bits
ColorBits: 32
Full screen.
EnableAutoDepthStencil = true.
DepthFormat: D3DFMT_D16
Hardware Vertex Processing.
Depth bits: 16
Stencil bits: 0
BackBufferWidth: 1024
BackBufferHeight: 768
Caps:
DeviceType = HAL
AdapterOrdinal = 0
DevCaps = CANBLTSYSTONONLOCAL | CANRENDERAFTERFLIP | DRAWPRIMTLVERTEX | EXECUTESYSTEMMEMORY | EXECUTEVIDEOMEMORY | HWRASTERIZATION | HWTRANSFORMANDLIGHT | PUREDEVICE | TEXTURENONLOCALVIDMEM | TEXTUREVIDEOMEMORY | TLVERTEXSYSTEMMEMORY | TLVERTEXVIDEOMEMORY
PrimitiveMiscCaps = BLENDOP | COLORWRITEENABLE | CULLCCW | CULLCW | CULLNONE | MASKZ | TSSARGTEMP
RasterCaps = ANISOTROPY | COLORPERSPECTIVE | DITHER | FOGRANGE | FOGTABLE | FOGVERTEX | MIPMAPLODBIAS | WFOG | ZBIAS | ZFOG | ZTEST
ZCmpCaps = ALWAYS | EQUAL | GREATER | GREATEREQUAL | LESS | LESSEQUAL | NEVER | NOTEQUAL
SrcBlendCaps = BOTHINVSRCALPHA | BOTHSRCALPHA | DESTALPHA | DESTCOLOR | INVDESTALPHA | INVDESTCOLOR | INVSRCALPHA | INVSRCCOLOR | ONE | SRCALPHA | SRCALPHASAT | SRCCOLOR | ZERO
DestBlendCaps = BOTHINVSRCALPHA | BOTHSRCALPHA | DESTALPHA | DESTCOLOR | INVDESTALPHA | INVDESTCOLOR | INVSRCALPHA | INVSRCCOLOR | ONE | SRCALPHA | SRCALPHASAT | SRCCOLOR | ZERO
AlphaCmpCaps = ALWAYS | NEVER
ShadeCaps = ALPHAGOURAUDBLEND | COLORGOURAUDRGB | FOGGOURAUD | SPECULARGOURAUDRGB
TextureCaps = ALPHA | CUBEMAP | MIPCUBEMAP | MIPMAP | MIPVOLUMEMAP | PERSPECTIVE | PROJECTED | TEXREPEATNOTSCALEDBYSIZE | VOLUMEMAP
TextureFilterCaps = MAGFANISOTROPIC | MAGFLINEAR | MAGFPOINT | MINFANISOTROPIC | MINFLINEAR | MINFPOINT | MIPFLINEAR | MIPFPOINT
CubeTextureFilterCaps = MAGFLINEAR | MAGFPOINT | MINFLINEAR | MINFPOINT | MIPFLINEAR | MIPFPOINT
VolumeTextureFilterCaps = MAGFANISOTROPIC | MAGFLINEAR | MAGFPOINT | MINFANISOTROPIC | MINFLINEAR | MINFPOINT | MIPFLINEAR | MIPFPOINT
TextureAddressCaps = BORDER | CLAMP | INDEPENDENTUV | MIRROR | MIRRORONCE | WRAP
VolumeTextureAddressCaps = BORDER | CLAMP | INDEPENDENTUV | MIRROR | MIRRORONCE | WRAP
LineCaps = ALPHACMP | BLEND | FOG | TEXTURE | ZTEST
MaxTextureWidth = 16384
MaxTextureHeight = 16384
MaxVolumeExtent = 16384
MaxTextureRepeat = 8192
MaxTextureAspectRatio = 8192
MaxAnisotropy = 16
MaxVertexW = 10000000000.0000
ExtentsAdjust = 0.0000
StencilCaps = DECR | DECRSAT | INCR | INCRSAT | INVERT | KEEP | REPLACE | ZERO
FVFCaps = PSIZE
TextureOpCaps = ADD | ADDSIGNED | ADDSIGNED2X | ADDSMOOTH | BLENDCURRENTALPHA | BLENDDIFFUSEALPHA | BLENDFACTORALPHA | BLENDTEXTUREALPHA | BLENDTEXTUREALPHAPM | BUMPENVMAP | BUMPENVMAPLUMINANCE | DISABLE | DOTPRODUCT3 | LERP | MODULATE | MODULATE2X | MODULATE4X | MODULATEALPHA_ADDCOLOR | MODULATECOLOR_ADDALPHA | MODULATEINVALPHA_ADDCOLOR | MODULATEINVCOLOR_ADDALPHA | MULTIPLYADD | PREMODULATE | SELECTARG1 | SELECTARG2 | SUBTRACT
MaxTextureBlendStages = 8
MaxSimultaneousTextures = 8
VertexProcessingCaps = DIRECTIONALLIGHTS | LOCALVIEWER | MATERIALSOURCE7 | POSITIONALLIGHTS | TEXGEN | TWEENING
MaxActiveLights = 10
MaxUserClipPlanes = 6
MaxVertexBlendMatrices = 4
MaxVertexBlendMatrixIndex = 8
MaxPointSize = 256.0000
MaxPrimitiveCount = 5592405
MaxVertexIndex = 16777215
MaxStreams = 16
MaxStreamStride = 508
VertexShaderVersion = -130815
MaxVertexShaderConst = 96
PixelShaderVersion = -65276
MaxPixelShaderValue = 340282346638528860000000000000000000000.0000
Supported texture formats:
D3DFMT_A8R8G8B8
D3DFMT_X8R8G8B8
D3DFMT_R5G6B5
D3DFMT_X1R5G5B5
D3DFMT_A1R5G5B5
D3DFMT_A4R4G4B4
D3DFMT_A8
D3DFMT_L8
D3DFMT_A8L8
D3DFMT_A4L4
D3DFMT_DXT1
D3DFMT_DXT2
D3DFMT_DXT3
D3DFMT_DXT4
D3DFMT_DXT5
*Error in Extensions.cpp line:18: Get unsupported extension proc address.
*Error in Extensions.cpp line:19: glMultiTexCoord3fARB
*Error in Extensions.cpp line:18: Get unsupported extension proc address.
*Error in Extensions.cpp line:19: glMultiTexCoord4fARB
*Error in Extensions.cpp line:18: Get unsupported extension proc address.
*Error in Extensions.cpp line:19: glClientActiveTextureARB
*Error in Extensions.cpp line:18: Get unsupported extension proc address.
*Error in Extensions.cpp line:19: wglGetExtensionsStringARB
EndD3D


EndLog.
=============================
this is my conf.ini

[il2]
title=Il2-Sturmovik Forgotten Battles
hotkeys=HotKey game

[window]
width=1024
height=768
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=1
Use3Renders=0

[GLPROVIDER]
GL=Opengl32.dll

[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8wrap.dll

[NET]
speed=25000
routeChannels=0
serverChannels=31
localPort=21000
remotePort=21000
SkinDownload=1
serverName=No Name
serverDescription=
remoteHost=
localHost=
socksHost=
checkServerTimeSpeed=1
checkClientTimeSpeed=0
checkRuntime=2

[MaxLag]
farMaxLagTime=10.0
nearMaxLagTime=2.0
cheaterWarningDelay=5.0
cheaterWarningNum=-1

[chat]
region=(dx=0.6923828,dy=0.071666665,x=-0.06347656,y=-0.0013020834)
adr0=ALL

[game]
Arcade=0
HighGore=1
mapPadX=0.6689453
mapPadY=-0.046875
viewSet=37
Intro=0
NoSubTitles=0
NoChatter=0
NoHudLog=0
NoLensFlare=0
iconTypes=3
eventlog=eventlog.lst
eventlogkeep=0
3dgunners=1


[HotKey game]
PrintScreen=ScreenShot
P=pause
Pause=pause

[HotKey gui]
Escape=activate

[HookViewFly Config]
timeFirstStep=2.0
deltaZ=10.0

[HookView]
MouseLeft=Len

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6

[HotKey builder]
MouseLeft=objectMove
MouseRight=popupmenu
Enter=freeView
Shift MouseLeft=worldZoom
Alt MouseLeft=select+
Alt MouseRight=select-
Alt Ctrl=unselect
PageDown=change+
PageUp=change-
End=change++
Home=change--
Ctrl MouseLeft=insert+
Insert=insert+
NumPad-0=insert+
F=fill
Ctrl MouseRight=delete+
NumPad.=delete+
Delete=delete+
Backspace=cursor
Tab=cursor
F10=land
F11=onLand
NumPad-=normalLand
NumPad+=toLand
NumPad-5=resetAngles
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-4=stepAzimut-15
NumPad-1=stepAzimut-30
NumPad-9=stepAzimut5
NumPad-6=stepAzimut15
NumPad-3=stepAzimut30

[MouseXYZ]
F1=SpeedSlow
F2=SpeedNormal
F3=SpeedFast
MouseRight=XYmove
F4 MouseRight=Zmove
MouseMiddle=Amove
F5 MouseRight=Amove
F6 MouseRight=Tmove
F7 MouseRight=Kmove

[MouseXYZ Config]
RealTime=1

[HotKey Console]
Shift Tab=Activate
[Console]
HISTORY=1024
HISTORYCMD=1024
LOAD=console.cmd
SAVE=console.cmd
LOG=0
LOGTIME=0
LOGFILE=log.lst
LOGKEEP=0

[sound]
SoundUse=1
SoundEngine=1
Speakers=0
Placement=0
SoundFlags.reversestereo=0
RadioFlags.Enabled=1
RadioEngine=2
MusicVolume=8
ObjectVolume=14
MusState.takeoff=1
MusState.inflight=1
MusState.crash=1
MusFlags.play=1
MasterVolume=14
Attenuation=7
SoundMode=1
SamplingRate=2
NumChannels=2
SoundExt.occlusions=0
SoundFlags.hardware=1
SoundFlags.streams=1
SoundFlags.duplex=1
SoundExt.acoustics=0
SoundExt.volumefx=0
SoundFlags.voicemgr=0
SoundFlags.static=1
VoiceVolume=12
Channels=2
SoundExt.extrender=0
SoundFlags.bugscorrect=0
SoundSetupId=8
ActivationLevel=0.02
Preemphasis=0.85
RadioLatency=0.5
AGC=1
PTTMode=1
SoundFlags.UseRadioChatter=0
SoundFlags.AutoActivation=0
RadioFlags.PTTMode=0
RadioFlags.PlayClicks=0
ActLevel=0
MicLevel=0
SoundFlags.forceEAX1=0

[rts]
;ProcessAffinityMask=1
mouseUse=2
joyUse=1
trackIRUse=1
DisableIME=0
locale=

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
Invert=0

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0

[Render_DirectX]
TexQual=3
TexMipFilter=2
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=0
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=0
TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=0

HardwareShaders=0

Shadows=1
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=7
ForceShaders1x=0
PolygonOffsetFactor=-0.0625
PolygonOffsetUnits=-1.0
Water=1
Effects=1

[Render_OpenGL]
TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=0
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=1
TexFlags.TexCompressARBExt=0

TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=0

HardwareShaders=1

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=3
LandShading=3
LandDetails=2

LandGeom=3
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=17
Water=1
Effects=1
ForceShaders1x=0

PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0

i have also atioglxx.dll

Flanker35M 08-06-2010 03:32 PM

S!

Remove the atioglxx.dll from IL-2 folder Xilon, it can be the cause for your corruption. The 10.7's have been reported to work nicely on MOST rigs. I wonder why you fly at so low resolution..your card could easily push 1900x1200 with everything maxed and not even burp. Also if you want to use larger resolutions change the SaveAspect=1 to 0.


All times are GMT. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.