Official Fulqrum Publishing forum

Page 2 of 2

Show 100 post(s) from this thread on one page

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)

- IL-2 Sturmovik: Cliffs of Dover (http://forum.fulqrumpublishing.com/forumdisplay.php?f=189)

- - Ati 5970 2 gig ? (http://forum.fulqrumpublishing.com/showthread.php?t=23217)

Derinahon

05-23-2011 09:08 PM

Lol, here you go. Spec in sig.

Quote:

Originally Posted by MegOhm (Post 287895)

Really...please post your card and in game settings...

Here, I will make it easy for you, just fill in the blanks

ATI HD 6970 Card Settings:
AA: Aplication Settings , Morpho Filtering: Unchecked
AF: 8x
Tessellazation: AMD Optimised
CAT AI: High Quality + Surface Format Optimisation: Unchecked
MipMap Detail Level: -----------
Vertical Refresh: Performance / Always off
AA Mode: Performance
OpenGL: Unchecked

In Game Settings
Resolution: 1680 x 1050
Full Screen: ON
Model Detail: High
Buildings Detail: High
Land Detail: High
Forest: Very High
Visual Effects: High
Texture Quality: Original
AA: 2x
Anti Epilepsy: OFF
SSAO: ON
Vert refresh: ON
Damage Decals: High
Buildings Amount: Unlimited
Land Shading: High
Grass: ON
Shadows: ON
Roads: ON

JG14_Jagr

05-23-2011 09:12 PM

The blue stripes appear on the horison where the sky blends to the earth/water. They are only visible at lower altitudes.. between about 1K and 3K or so.. IIRC

Troll2k

05-23-2011 11:40 PM

The blue horizontal stripes seem to only be a problem with the ATI 69xx cards.

Whether it is the game or a driver issue it is still unknown.

On another note, a very well done, week long,scientific test by TXgunslinger determined the microstutters were caused by the cpu and not the video card.

"In summary - It's the CPU not the GPU that producing the stutter and pausing."

http://forum.1cpublishing.eu/showthr...=TX-gunslinger

naz	05-24-2011 12:05 AM

Quote:

Originally Posted by MegOhm (Post 287876)

This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini

If you have a quad+ core I believe you should not be manually setting the process afinity mask setting in the config file:

Quote from Luthier: "We did unload a bunch more stuff into other cores already though. It will obviously only lead to performance improvement if you have more than two cores, and if you haven't manually set your processaffinity in the conf.ini."

http://forum.1cpublishing.eu/showthr...=23002&page=41 post 401

Kankkis

05-24-2011 01:57 AM

Robin, don't sell your 5970 card, it's a really good card, what we need is good crossfire profile from ATI, or good crossfire suppord from devs.

There is only 1 card from ATI what is faster than yours, it's 6990 and it's crossfire card too, so same problems with CoD, if you buy one GPU card you downgrade your computer.

all 5970 is downclocked from factory, so i overclocked mine and get about 25% faster 5970 than default, of course i cannot say overclock it, that is risky but i put link to you, i do it and my card is very fast at moment and stable with factoryfan.
i raised my voltage only 1 notch as you see at the link, only software i use was MSI Afterburner, and i overclock only when there is need to it (A-10 and CoD)

http://www.guru3d.com/article/overcl...on-5970-guide/

Kankkis

Thee_oddball

05-24-2011 02:37 AM

Quote:

Originally Posted by Robin2k7 (Post 287849)

i am wondering ...i cant get COD running smooth no matter what i try(over land) .

1 person told me that because i have dual processors only 1 gig each and that cause lots of problems (micro stutters) .

if i need a other cart what cart you suggest i buy(ati ore G-force) and what type..especially fore COD .

help me out people

thanks in advance

like ataros said the micro stutters have nothing tod with the GPU , i get an AVG of 32fps overland in "black death" trak from inside cockpit and even higher on dogfight servers.

I know this is a PITA but i would recommend a fresh install of windows with nothing but the game installed and then try and see what performance you get, i say this because that is what i run a stripped down win7 for games only! ..it really does help performance :)

S!

Bryan21cag

05-24-2011 05:20 AM

Quote:

Originally Posted by Robin2k7 (Post 287849)

Before you do any of the complicated mishing and moshing of all the settings and that...... make sure your running the most up to date drivers i was getting the same micro stutters and crap performance even after the patch but then updated to 11.5 ATI drivers for my cards and all of a sudden stutters were gone and i was getting very good frame rates with all graphics turned up over London. Still not perfect but far better then what i think your seeing now.

Hope this works cheers

Robin2k7

05-24-2011 07:06 AM

guys i really appreciate your comments on this 1 ...its early in the morning and my cellar is fulled with water .

so in a few ours i am ready and than i am gonna check your ideas and adjust my settings ..

once again thanks a lot and i am sure it i get this problem fixed !! . :o

Robin2k7

05-24-2011 06:11 PM

[QUOTE=MegOhm;287876]This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini

when i change render to 11 the ground looks blurry ...i am not very good with this is it the config file in your documents ore is it in the steam directory and
fore some reason i cant find ProcessAffinityMask in my conf file .

with the old patch i saw them but right now its gone .

:confused:

All times are GMT. The time now is 06:31 PM.

Page 2 of 2

Show 100 post(s) from this thread on one page