try your settings without anthropomorphe filter.
If they than work without proplems....

i have it disabled after the first day and will never touch it again if possible.
I had the proplem that the elevator trim whell on my HOTAS watch jikning a little bit - wow, the game thought the pilot had his left hand always on the trimmwheel - so, most other functions didnt work in that time.

depending on the aircraft you cannot deploy flaps/ gear unless you're below a certain speed iirc, with the 109 you have to hold down the flaps key to lower them and that can take a while as the flaps are dropped/ raised by a wheel.

Also no trimming possible in the BF 109, however in Bombers it´s working, like in the Do 17.

regarding the 109
i found it was inop in quick missions only,a bug im sure
in campaign mode the trims and other sliders are working

The elevator trim and flaps work fine for me in the Bf 109E-3 (in quick missions OK too).

I use a Thrustmaster Warthog and have the elevator trim mapped to an axes on the throttle. To set the flaps I just hold the keyboard key down and yes it does take a while to fully raise or lower flaps in a 109.

@JG53Frankyboy: canceled the anthropomorphe filter for my Geforce GTX 460 but still the same problems.

@huckster: When i started the german campaign i couldn't even raise my gear after take of (109). Also there is no "Screen response" when i press "G" on the Keyboard like it is if i hit i.g. "I" it shows "Engine Start". Strangely Spitfire and Hurrican work just fine.
BTW, forgot to mention i'm on basic engine management, don't know if it makes a difference in that case.

Anyway, thanks for trying to help guys, i very much appreciate that! :-)
Maybe one of the next patches would solve this problem....

Aha! Success! Thank you.

I diabled the filter and now the 109 and 110 do everything I ask. :)

Which card do you have, AMD or Nvidia?

:???: anthropomorphe filter is a realism option PomFritz, nothing to do with graphix card.

Ati 5870.