Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   Performance threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=195)
-   -   Why launcher.exe process takes only about 1gb of ram?? (http://forum.fulqrumpublishing.com/showthread.php?t=19542)

furbs 03-27-2011 12:30 AM

Feuerfalke...are you telling me your not even a tiny-whiny bit worried by this?

Heliocon 03-27-2011 12:33 AM

Quote:

Originally Posted by highness (Post 241212)
i have win7 64bit

What about your GPU? Maybe its capping out your system ram based on your Vram and only loading in use textures straight to your GPU through paging when needed instead of loading the textures into system ram for access. (which would be very very bad).

highness 03-27-2011 01:20 AM

Quote:

Originally Posted by jimbop (Post 241217)
Did you do the perfmon track? I'd be interested in seeing it after a couple of minutes of play if you could upload a screenshot.

i just looked into perfmon, there are many different trackers in the RAM Memory section that can be added to the monitor.

i'm not familiar with this, which ones would represent the memory usage and that you would suggest to use?

because by default in the perfmon there is only one tracker :

% Processor time

the question is to find why the required specifications are 4gb of RAM and why the "final product" would use only about 1gb


my config is:

i7 875k
8gb of ram ddr3
GTX295
Win7 64bit

and my current/average FPS in il2 cod RUS is 5/10/15-35 + lots of stutters , running at native desktop resolution 1920x1680, 32bit, everything to medium AND with Antiepilepcy=0 setting in the conf.ini

it is very barely playable as it is now...

jimbop 03-27-2011 03:21 AM

Quote:

Originally Posted by highness (Post 241253)
i just looked into perfmon, there are many different trackers in the RAM Memory section that can be added to the monitor.

i'm not familiar with this, which ones would represent the memory usage and that you would suggest to use?

because by default in the perfmon there is only one tracker :

% Processor time

the question is to find why the required specifications are 4gb of RAM and why the "final product" would use only about 1gb

Click on Performance Monitor and then the green plus at the top. Next, click the little down arrow next to Memory and Add>> % Committed Bytes in Use then OK. Depending on your setup you may need to right-click on the % Committed Bytes in Use line at the bottom and Scale Selected Counters to get the line visible on the chart.

You can also add various CPU trackers to determine active threads etc - pretty powerful app.


All times are GMT. The time now is 12:08 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.