|
Quote:
I also got SLI to run butter smooth by forcing split screen rendering instead of alternate frame rendering but AVG frame rate was only 35 FPS with a max of 70 FPS, Minimum 17 FPS was higher than normal though. All 4 GPUs were running flat out pegged at 99% the whole time with SFR. PS I love what they've done with the lastest Beta Patch for the new look and the smoother performance! |
System stripped back to bare essentials..
Water blocks should all arrive next week! https://blufiles.storage.live.com/y1...U/IMG_2294.JPG https://blufiles.storage.live.com/y1...I/IMG_2301.JPG https://blufiles.storage.live.com/y1...s/IMG_2306.JPG https://blufiles.storage.live.com/y1...0/IMG_2304.JPG First Rad Fans Sleeved https://blufiles.storage.live.com/y1...g/IMG_2315.JPG https://blu1.storage.live.com/items/...4/IMG_2317.JPG https://blu1.storage.live.com/items/...4/IMG_2316.JPG |
Finished Rads...
3 in series for the GPUs and 1 for the CPU in the new config. https://blufiles.storage.live.com/y1...E/IMG_2318.JPG https://blu1.storage.live.com/items/...4/IMG_2320.JPG https://blufiles.storage.live.com/y1...0/IMG_2323.JPG 1 set of Res Pumps, LEDs and sensors sleeved ready for mounting and final crimping. https://blufiles.storage.live.com/y1...g/IMG_2324.JPG [IMG]blufiles.storage.live.com/y1pIDRyCcRWxVweq1jyMmaS_tRxcnKu5VGf2evhZBVlpTVUWxV-2oTIZymeqURPxQ04-S3LwDpVSwY/IMG_2325.JPG[/IMG] |
Ok almost done.
Just have 1 more GPU cable to do as more black 16awg wire only arrived yesterday. A couple more cables to sleeve including the front panel controls and a couple 12v runs for the power board in the middle. Mount the SSD cradle and sleeve. And re-crimp all the sensors. Fit blocks and tubing. Im expecting the blocks to arrive late next week. Here's the beast almost complete, everything fits as planned with minimal cables visible!!! https://blufiles.storage.live.com/y1...341.JPG?psid=1 https://blufiles.storage.live.com/y1...342.JPG?psid=1 https://blufiles.storage.live.com/y1...343.JPG?psid=1 https://blufiles.storage.live.com/y1...344.JPG?psid=1 https://blufiles.storage.live.com/y1...345.JPG?psid=1 |
Your buildup looks much cleaner now.
But what I don't understand is, why you used quick-connect couplings on the radiators and also on the board. The risk of leaked water by connecting and disconnecting them on the board is in my eyes a little bit to high. I keep watching.:grin: |
Not bad at all Phat..
you got a long way to go yet fella: http://web.mac.com/lord_philip/sincl...es/my_zx81.jpg |
I made a list of things left to do... as much as I do there still seems to be so much left to do! :shock:
Shorten and Sleeve Sata Cables Make and Sleeve SSD power cables Drill holes to Mount the SSD cradle Make and sleeve a long USB cable for Aquaero Make and sleeve 2 x MB Molex cables for extra GPU PCIE power Make and sleeve 2nd 8pin CPU cable Sleeve 2x tubemeter cables Make and sleeve molex to SATA power cable for DVD Make and seeve SATA data cable for DVD Paint DVD black Paint SLI bridge Remove stickers from PSUs Sleeve exhaust fans Ducting/cable mounts and secure long cable runs Terminate the temp sensors Mount/sleeve 3 x UV light bars Install/Mount the blocks.. if they ever arrive :mad: Reflow the Indigo Xtreme Run the tubing, fill, bleed and leak test Reprogram the controller for the new config Im exhausted just thinking about it! |
Great Rig.
Now you don't need to heat your room in winter anymore. :cool: By the way, whats your average framerate in CloD? |
DUDE! That's not a rig, that's a damn MONSTER. Sweet Jebus, my system just hid itself in the darkest corner of my officer to sulk..
|
| All times are GMT. The time now is 08:35 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.