|
|
#1
06-02-2016, 05:38 AM
|
|||
|
|||
How to map throttle
Hello All.
I have Cliffs of Dover and a Logitech extreme 3D pro joystick. I have no idea how to map the throttle. I went to 'aircraft' found throttle which went from 1 to 10 for different speeds, but how do I turn all that into the slider of the throttle on the joystick. Question 2: There are so many commands, how to I get a print on them all. Regards, zl2bmh 
|
|
#2
07-01-2016, 11:20 AM
|
|||
|
|||
|
Morning.
If you look under the controls section, go all the way down to the bottom and look for section labeled HOTAS Control. Find the one labeled power, click on it and move you desired throttle on joystick. It should automatically assign throttle to that axis on the joystick. Make sure you move your throttle up (increase power) and not back (decrease power) when you do this though. Otherwise it will be reversed!! If you have additional throttles you can also set mixture and prop pitch the same way. And you are done. Last edited by Marabekm; 07-01-2016 at 11:26 AM.
|
 |
|
|
Linear Mode
