Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik > Daidalos Team discussions

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-10-2012, 11:13 PM
Bearcat Bearcat is offline
Approved Member
 
Join Date: Oct 2007
Location: Northern Va. by way of Da Bronx
Posts: 992
Default Simulated toe brakes

In light of the fact that you can simulate toe brakes already by doing the following: Go to your IL2 folder and go to Users>Doe>Settings. When you open up the folder, scroll down to this section:

[HotKey move]
AXE_RX JoystickDevice1=trimelevator
AXE_RY JoystickDevice1=trimaileron
AXE_RZ JoystickDevice2=rudder
AXE_RZ JoystickDevice1=trimrudder
AXE_U JoystickDevice1=pitch
AXE_U JoystickDevice0=-radiator
AXE_Y JoystickDevice2=brakes
AXE_X JoystickDevice0=aileron
AXE_Y JoystickDevice0=elevator
AXE_Z JoystickDevice1=-power


Note the section highlighted in red. In your file that will either be AXE_X JoystickDevice2=brakes or AXE_X JoystickDevice2=brakes or whatever device your brakes are on your setup.. If the line in your file says X then copy that line and change the X to a Y if it says Y copy the line and change the Y to a X so that you will end up with something like this:

[HotKey move]
AXE_RX JoystickDevice1=trimelevator
AXE_RY JoystickDevice1=trimaileron
AXE_RZ JoystickDevice2=rudder
AXE_RZ JoystickDevice1=trimrudder
AXE_U JoystickDevice1=pitch
AXE_U JoystickDevice0=-radiator
AXE_X JoystickDevice2=brakes
AXE_Y JoystickDevice2=brakes
AXE_X JoystickDevice0=aileron
AXE_Y JoystickDevice0=elevator
AXE_Z JoystickDevice1=-power


Save that file. Then.. and this is important.. Change the properties on that file to read only.

The reason why you have to change that is because if you don't as soon as you launch the sim and go into the controls menu it will reset to the default the same as the screen resolution settings do in the config file if you open up il2 setup. When you go into the Hardware> inputs screen in the sim and look at the Axes you will notice that there will be two lines for brakes and you can adjust the sliders for each one accordingly. This can be done even in the stock IL2 with no mods at all.

Is there a way to just add it into the sim without having to go through all that? It seems like it would be pretty simple to do since it is so easy to do already. I am pretty sure that once 4.12 comes out the old glitch that makes the screen resolution settings revert to default if you open il2 setup will be fixed with the new FoV fixes. Also.. can we add a line in the config to set a default speed bar? Like.. Speedbar=0-4 or something like that? This way we won't have to scroll through the speed bar every time we boot up.

Last edited by Bearcat; 11-12-2012 at 01:34 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.