Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik > IL2 Mods, discussion and links

Reply
 
Thread Tools Display Modes
  #1  
Old 07-30-2013, 02:50 AM
Raven Morpheus Raven Morpheus is offline
Approved Member
 
Join Date: May 2011
Posts: 75
Question Why is the F86 so slow?

Hello

I thought I'd have a go in the F86 and so I downloaded the campaign called Honcho and CY6's Korea map.

However, having looked at Wikipedia I am left wondering why the F86 is so slow. The most I can get out of it is 630mph but that was in a dive from about 6000ft to about 3000ft. When going in a straight line at about 5000-6000ft all I could get out of it is 300-400mph.

Wikipedia states -

Quote:
Maximum speed: 687 mph (1,106 km/h) at sea level at 14,212 lb (6,447 kg) combat weight
also reported 678 mph (1,091 km/h) and 599 at 35,000 feet (11,000 m) at 15,352 pounds (6,960 kg). (597 knots (1,106 km/h) at 6446 m, 1,091 and 964 km/h at 6,960 m.)
So why is the F86 in IL2 200mph-300mph slower than it should be?
Reply With Quote
  #2  
Old 07-30-2013, 03:17 AM
IceFire IceFire is offline
Approved Member
 
Join Date: Apr 2008
Posts: 1,879
Default

Quote:
Originally Posted by Raven Morpheus View Post
Hello

I thought I'd have a go in the F86 and so I downloaded the campaign called Honcho and CY6's Korea map.

However, having looked at Wikipedia I am left wondering why the F86 is so slow. The most I can get out of it is 630mph but that was in a dive from about 6000ft to about 3000ft. When going in a straight line at about 5000-6000ft all I could get out of it is 300-400mph.

Wikipedia states -



So why is the F86 in IL2 200mph-300mph slower than it should be?
You'd have to ask the MOD folks who programmed it. It's not an official aircraft...

Also are you sure you're reading the speed right. Indicated Air Speed (IAS) is what shows on the cockpit gauges and True Air Speed (TAS) is what shows on the "wonder woman" invisible cockpit view. IAS and TAS are the same at sea level but diverge increasingly as altitude increases (and air density decreases).

Top speeds of aircraft are all given in TAS which makes this a fairly common complaint. I'm not sure if that's the case with the modded F-86 but my guess is that it could be.
__________________
Find my missions and much more at Mission4Today.com

Last edited by IceFire; 07-30-2013 at 03:19 AM.
Reply With Quote
  #3  
Old 07-30-2013, 11:06 AM
K_Freddie K_Freddie is offline
Approved Member
 
Join Date: Feb 2008
Posts: 563
Default

Icefire means that Indicated Airspeed (IAS) is less than True Airspeed (TAS) at altitudes > 0, the higher you go the more the divergence between the two.

It does not mean that you're flying slower - there should be a IAS/TAS vs altitude chart for the a/c that you can consult, to get an idea of the relationship between the two indicators.
__________________
Reply With Quote
  #4  
Old 07-30-2013, 01:01 PM
Raven Morpheus Raven Morpheus is offline
Approved Member
 
Join Date: May 2011
Posts: 75
Default

Quote:
Originally Posted by IceFire View Post
You'd have to ask the MOD folks who programmed it. It's not an official aircraft...

Also are you sure you're reading the speed right. Indicated Air Speed (IAS) is what shows on the cockpit gauges and True Air Speed (TAS) is what shows on the "wonder woman" invisible cockpit view. IAS and TAS are the same at sea level but diverge increasingly as altitude increases (and air density decreases).

Top speeds of aircraft are all given in TAS which makes this a fairly common complaint. I'm not sure if that's the case with the modded F-86 but my guess is that it could be.

Hmm. I thought it came with 1946. Just checked a clean 4.11.1 install and it's not in there so yes it must be from the modpacks I've been using then, I've used UP and now HSFX. It's been so long since I played stock IL2 1946 that I forget what's been added to it.

What do you mean by "wonder woman" invisible cockpit view? I'm looking at the speed in mph on the little hud in the bottom left corner (think it's referred to as the speed bar?) btw.

Quote:
Originally Posted by K_Freddie View Post
Icefire means that Indicated Airspeed (IAS) is less than True Airspeed (TAS) at altitudes > 0, the higher you go the more the divergence between the two.

It does not mean that you're flying slower - there should be a IAS/TAS vs altitude chart for the a/c that you can consult, to get an idea of the relationship between the two indicators.
I see. Any idea where I can find an altitude chart for the F86?
Reply With Quote
  #5  
Old 07-30-2013, 01:26 PM
majorfailure majorfailure is offline
Approved Member
 
Join Date: Jan 2013
Posts: 320
Default

Quote:
Originally Posted by Raven Morpheus View Post
I see. Any idea where I can find an altitude chart for the F86?
It is not plane specific, but temperature dependant.
Try this(not tried myself, just googled it):
http://www.csgnetwork.com/tasinfocalc.html

WonderWomanView refers to the no cockpit view, where everything is transparent. Speed gauge there displays TAS.
Reply With Quote
  #6  
Old 07-30-2013, 01:31 PM
Raven Morpheus Raven Morpheus is offline
Approved Member
 
Join Date: May 2011
Posts: 75
Default

Quote:
Originally Posted by majorfailure View Post
It is not plane specific, but temperature dependant.
Try this(not tried myself, just googled it):
http://www.csgnetwork.com/tasinfocalc.html
Thanks I'll try that.

Quote:
WonderWomanView refers to the no cockpit view, where everything is transparent. Speed gauge there displays TAS.
Oh I see. Yes I've come across that view whilst accidentally cycling through views once, don't know how though. I usually keep it in cockpit view and occasionally use the views linked to F2, F3 or F8.
Reply With Quote
  #7  
Old 07-30-2013, 10:25 PM
K_Freddie K_Freddie is offline
Approved Member
 
Join Date: Feb 2008
Posts: 563
Default

Quote:
Originally Posted by majorfailure View Post
It is not plane specific, but temperature dependant.
Sorry the Major is right.. I'm just used to seeing it in the a/c manual..
__________________
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.