|
Controls threads Everything about controls in CoD |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
can't get bail out to work
the pilot has a parachute, I open the canopy. figured it out, need to be in the cockpit, can't be in a "view" outside like in PF.
Last edited by LA1; 05-21-2013 at 03:35 AM. Reason: FIGURED IT OUT |
#2
|
||||
|
||||
There is a button to 'press' to bail,or better bind a button on your joystick to work this operation,I also believe you have to be over a certain height to enable you to bail out,so trying to bail out on the deck may not allow you to jump.On many German aircraft you will also have to jettison the canopy first.
What aircraft are you flying?
__________________
Alienware Aurora|Win 7 64-bit Home Premium|IC i7-920 Processor (Quad-Core)|14GB DDR3 RAM|1 TB SATA 7200rpm Hard Drive|GIGABYTE GeForce GTX 770 2GB WINDFORCE 3 X fan|Thrustmaster Warthog|Saitek Pro Combat rudder pedals,throttle quadrant and Cessna trim wheel|TrackIR4|Sense of humour,I find it comes in handy! |
#3
|
||||
|
||||
Assign keys/buttons for this commands:
Option >Controls>General: Toggle Canopy/Hatch/Door Toggle work well for plane with only one these devices, ie Hurricane (Canopy), Blenheim (Hatch), DH-82 (Door) or Open Canopy/Hatch/Door Close Canopy/Hatch/Door This command is sequencial, first press open Canopy (if available), second open Hatch (if available), etc... IF plane have only Hatch, ie Blenheim the first press open And: Jettison Canopy/Hatch/Door Need for Bf-109 for example. Default key for bail out is "Ctrl+E" - you can reassign or create a *NEW command and assign for other key/button. You are not able to bail if is too low or plane are in high G spin. And sometimes the parachute dont open. * Unlinke IL-2 that can allow map two keys/buttons for one command, CloD allow multiples - just select the command and click in NEW to creat a copy of this command. Sokol1 |
|
|