I'm getting VERY good FPS at 1920X1200 8XAA, here is my conf.ini

[JG14_Jagr]

Originally Posted by akodonnell

Does the 2Gb of VRAM on the 6970 make a huge difference? The GTX 560 Ti that I have is overclocked massively and has similar benchmarks but only has 1 Gb of VRAM.

Hard for me to tell since its the only card I have...

[JG14_Jagr]

Originally Posted by Flanker35M

S!

Jagr, can you please post your CCC settings and driver version as you seem to have same GPU than I have and pretty much similar system memory wise too. Seems that I have to re-install the game and check again if that helps...

I'm using the 11.2 drivers and my CCC is almost entirely default..mostly "use application settings" Its a new build PC so I have not taken too much time to dig around in it..

[jimbop]

Originally Posted by JG14_Jagr

Yes, the INCORRECT spelling is the "correct" one..it needs to be "C"y to work..and it needs to be in your confs.ini file not the conf.ini file.. I did that as directed by the Russian wizzards on Sukhoi and it was smooth sailing for me after that..

Can you confirm that this is post-patch? Disabling the filter in the Video options screen changes conf.ini to:

[BOB]
EpilepSyFilter=0

EDIT: Sorry, please ignore. Just read through page 2 like I should have done in the first place...

[IvanK]

Jimbo that is correct and there is no ref to Anti epilpecsy in Confs.ini either.

The "C" is a red herring

[jimbop]

Originally Posted by IvanK

Jimbo that is correct and there is no ref to Anti epilpecsy in Confs.ini either.

The "C" is a red herring

Thanks.

[GOZR]

Guys with 1 GB VRAM on their video card must reduce your resolution to at list 1440x900 to see the sim getting a lot smoother.. ( 1.5 is not enough as well )
If you are on the market to get a video card for this Sim you must get a 2 GB minimum.

[MajorTom]

Thanks for the info!

Have you changed anything else than epilepsy and ProcessAffinityMask settings?

I played 4 hours yesterday and got 35fps and 50fps without the cockpit.

I have AMDx6 processor and the value for ProcessAffinityMask should be 63.
It does not make any difference if I use this option or not.
Mainly the 1st core is only used.

Is there any other value for AMDx6 what would do the trick?

Phenom II X6 1055T/AM3 2.8GHz
GIGABYTE NVIDIA GTX465 1GB
6GB 1333MHZ DDR3

[jimbop]

Originally Posted by GOZR

Guys with 1 GB VRAM on their video card must reduce your resolution to at list 1440x900 to see the sim getting a lot smoother.. ( 1.5 is not enough as well )
If you are on the market to get a video card for this Sim you must get a 2 GB minimum.

Yes, I agree at the moment but I think this will probably be addressed in the next patch.

[PzMeyer]

I tried out your confi.

Indeed the CPU isnt the Problem !

I guess its the GPU VRAM. All with 2GB VRAM seem to have less problems and i got another strange thing witch is maybe driver relatet.
See a screenshot i taken over channel 6 hurries vs 6 do 215. Setting med - high, getting about 30 fps witch is too low for my system i guess. But after the last Donier was going and only 6 Hurries left suddenly my FPS broke down to 0.8 and got strange output in the info window.
Afterburner showing that almost 1GB of VRAM is used.....and core clock of gpu suddenly went down O_O

Maybe this is helpful for developers, hope so

[Plt Off JRB Meaker]

Good stuff,where would my confs.ini be found?I know where the conf.ini is but can't locate the confs.ini.

Thank


EDIT :GOT IT NOW