|
IL-2 Sturmovik The famous combat flight simulator. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
this is mine
Oh i have an 8800 gts 640Mb! important differences are in red [Render_OpenGL] TexQual=3 TexMipFilter=3 TexCompress=0 TexFlags.UseDither=0 TexFlags.UseAlpha=0 TexFlags.UseIndex=0 TexFlags.PolygonStipple=0 TexFlags.UseClampedSprites=0 TexFlags.DrawLandByTriangles=1 TexFlags.UseVertexArrays=1 TexFlags.DisableAPIExtensions=0 TexFlags.ARBMultitextureExt=1 TexFlags.TexEnvCombineExt=1 TexFlags.SecondaryColorExt=1 TexFlags.VertexArrayExt=1 TexFlags.ClipHintExt=1 TexFlags.UsePaletteExt=1 TexFlags.TexAnisotropicExt=1 TexFlags.TexCompressARBExt=0 TexFlags.TexEnvCombine4NV=1 TexFlags.TexEnvCombineDot3=1 TexFlags.DepthClampNV=1 TexFlags.SeparateSpecular=1 TexFlags.TextureShaderNV=1 HardwareShaders=1 Shadows=2 Specular=2 SpecularLight=2 DiffuseLight=2 DynamicalLights=1 MeshDetail=2 VisibilityDistance=3 Sky=2 Forest=3 LandShading=3 LandDetails=2 LandGeom=3 TexLarge=1 TexLandQual=3 TexLandLarge=1 VideoSetupId=17 Water=3 Effects=1 ForceShaders1x=0 PolygonOffsetFactor=-0.15 PolygonOffsetUnits=-3.0 |
#12
|
|||
|
|||
Still no luck
This really really sucks |
#13
|
|||
|
|||
Have you tried this beta dll?
http://forum.1cpublishing.eu/showpos...1&postcount=37 |
#14
|
|||
|
|||
I've got to repeat Bullseyes Question, because that is really, really important:
Did you uninstall the drivers or did you just install the new drivers? It's strongly recommended that you uninstall your drivers *before* pluggin' in the new card and you should also run DriverCleaner Pro. Then you change the cards and install the drivers. They are probably even the same drivers, but it makes it even more obvious, that you NEED to delete all the settings if you don't want to run into problems. And your problem basically leaves only 2 options: 1. You didn't uninstall the old drivers and settings or 2. Your PSU is too weak |
#15
|
|||
|
|||
Check that Threaded Optimisation is set to OFF for Il2 in the NVidia Control Panel (It helps frame rates in Il2 on the other Nvidia cards, can't see why it won't work for your new one)
Last edited by Inadaze; 09-01-2008 at 08:19 PM. |
#16
|
|||
|
|||
I did run the driver cleaner pro but this was done after I installed the card.
I will oull the card out again, clean the driver and reinstall. I have set Threaded Optimisation is set to OFF and still no luck, the strange thing is that flak, AA does not change the framrate. Will try the new install and the new Dll posted (thanks for them) and give that a go, if that fails I guess the card will end up as a paper weight until BOB PSU is a 620w corsair so it should handle the power as this card uses less than a 8800 GTX so hopefilly its the driver issue. Should i update the chipset driver on my P5N 32-E SLI Plus - no idea how to do this yet |
#17
|
|||
|
|||
That mobo designation looks like an Asus number. If so, then there should have been some software included in the bundle for easy mobo BIOS updates. usually only one or two clicks and you're done.
|
#18
|
|||
|
|||
Well I have updated BIOS, Chipset,GPU and still no luck.
Time to get rid of the 260 GTX i think, which is a joke as i think there is an issue with the game more than the card but i could be wrong |
|
|