![]() |
|
Controls threads Everything about controls in CoD |
![]() |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]() Quote:
![]() bounty hunting this family and author ![]() haha ! http://www.ww2aircraft.net/forum/att...zum_start1.jpg i love you man, i had hte name of the pic on my workscreen, i never tought of it before. Last edited by pupo162; 11-15-2011 at 08:24 PM. |
#12
|
||||
|
||||
![]() Quote:
Sad part is the joystick itself, wrt force feedback is great! but the throttles and rudders are total crap! For a long time I was following the thread at Logi on this issue.. but.. after some months it looks like Logi has gave up on the G940.. Those who are not experancing problems should count themselfs lucky and hope that they.. like so many others.. dont have the problem show up eventually. So if you have to have FFB joystick, and are willing to repalce the throttle and rudders, than go for it! But if you only have so much $ to spend, I would recomend you look for an old MSFFB2 joystick on ebay.
__________________
Theres a reason for instrumenting a plane for test..
That being a pilots's 'perception' of what is going on can be very different from what is 'actually' going on. |
#13
|
||||
|
||||
![]()
The "throttle problem" of the G940 is really easy to repair, if your stick is out of warranty you just open the throttle unit (screws under the rubber pads) and control the connection from the pcb to the buttons and wheels.
Usually the cable ist almost too short and fixated with scews with washers, somtimes clamping a cable or causing tension wich pulls the plug from the socket. The cable consists of 10 wires 0,14 mm thick, iirc, in my case a careful rerouting solved the problem.
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects ![]() |
#14
|
||||
|
||||
![]() Quote:
I wish you well with what you have, but I won't touch anything that takes three goes to get a good result. cheers, B
__________________
Another home-built rig: AMD FX 8350, liquid-cooled. Asus Sabretooth 990FX Rev 2.0 , 16 GB Mushkin Redline (DDR3-PC12800), Enermax 1000W PSU, MSI R9-280X 3GB GDDR5 2 X 128GB OCZ Vertex SSD, 1 x64GB Corsair SSD, 1x 500GB WD HDD. CH Franken-Tripehound stick and throttle merged, CH Pro pedals. TrackIR 5 and Pro-clip. Windows 7 64bit Home Premium. |
#15
|
|||
|
|||
![]()
Got a G940 and like others say, the stick is excellent the rest of the kit is crap.
I'd love to try out the CH FrankenForce mod http://snomhf.exofire.net/frankenForce/intro.html If CH mass produced that they could make some money |
#16
|
|||
|
|||
![]()
I liked my new G940 out of the box at first but then I was adviced to use the Firmware 1.42 and so I did. It was a disaster, I didn't like it at all. FF violently kicking for nothing and too strong in the neutral zone.
Seems that Firmware totally messed it up. Any of you have experience with this? I'm gonna return that thing today for a new one without updating.. |
#17
|
||||
|
||||
![]() Quote:
__________________
Theres a reason for instrumenting a plane for test..
That being a pilots's 'perception' of what is going on can be very different from what is 'actually' going on. |
![]() |
|
|