black box in-flight data recorder

[E69_vencejo]

Uau...
I will check all test right now and i´ll post it.

[E69_vencejo]

Finish the very first test.
All work, including the 3 test and excel file. THANKS!
Hud data:
Working all data default, with remarks:
TIME: Refresh every 0.9 seconds in my pc ( processor 2.66 mgh @ 3.6).
ROC: no work in bf´s (they dont have climb/descent rate gauge) and Tiger (it have it).
HEADING: work on all models.

Questions:
What is PEI?
What is the difference between "I_VelocityIAS" and "Z_VelocityIAS"?
What is the difference between "I_Altitude" and "Z_AltitudeAGL/Z_AltitudeMSL"? (i think agl=altitude from ground level and msl=from sea level)

Well, is too late for me now, so I leave the rest for tomorrow
Good night and thanks again.

[FST]

Yee Haa that is good news!

Question.

Did you install the Microsoft Measurement Studio C# EXPRESS software? If not, I wonder what caused it to start working for you?

As for the difference in those different values. I'm working on a readme to explain/cover those. Also working on variables that are not depended on wether or not the plane has 'said' gauge. I hope to have it done by next weekend.

[E69_vencejo]

I do not install it because finally it was not necessary.

I really do not know why it started to work.
The first steep I did was copy and paste the script in the *. cs file, and did not work.
The next steep was to open the mission in FMB and paste the script in the tab "script", save and fly the mission. It was then that it worked.
It may be that when I copied the first time the script to paste in the *. cs not copy everything.
Although this does not explain why it works now and before, with the zip files, no.

[klem]

Originally Posted by FST

Yee Haa that is good news!

Question.

Did you install the Microsoft Measurement Studio C# EXPRESS software? If not, I wonder what caused it to start working for you?

As for the difference in those different values. I'm working on a readme to explain/cover those. Also working on variables that are not depended on wether or not the plane has 'said' gauge. I hope to have it done by next weekend.

Hi

an old thread I know, and seen in other places, but I wondered if you could explain something.

I am getting Z_VelocityTAS readings of roughly half I_VelocityIAS. Am I misunderstanding this as 'True Airspeed'? Also the Z_VelocityIAS is similarly about half the I_VelocityIAS. Any thoughts?

I'd also like to know what I_Peilzeiger is
Pfeilzeiger seems to be german for mouse pointer but don't see where that fits in

One other thing, I'm trying to find out if we are given 'Standard Day' temps, pressures etc as there is a discrepancy between on and off line speeds. The temperatures at altitude suggest not. Have you found a variable for air pressure that might also help?