![]() |
#131
|
||||
|
||||
![]()
Foxcon 975chipset E6600 775 series
Dual Crossfire Ati X1600 Pc6400 4gb Xf1 extrem music Sound Blaster Creativelabs 5.1 trkir4pro X52throttel cntrl Saitek 290pro Saitek Rudder pedals 4.09beta march set dll's running it in perfect mode FPS 43 to 70 depending on the map. light flat, shadows flat, all others perfect, excellent, high,
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc |
#132
|
|||
|
|||
![]()
Can anyone tell me what are the maximum settings for the conf.ini. Are some only 2 or do they all go higher.
|
#133
|
|||
|
|||
![]()
max settings - switch to perfect mode, select maximum settings in the il2setup.exe, in the conf.ini set the visibility distance to 72km, under OpenGL section set water = 3 (or 2 or 4, depends on GF), set forest = 3.
|
#134
|
|||
|
|||
![]()
Jurinko.
Visibilty set to 73 in Conf.ini. ? do you mean 3 which seems to be the defult with Landgeom=3 |
#135
|
||||
|
||||
![]()
I set my visibilty to 73 and it went back to 3
__________________
|
#136
|
|||
|
|||
![]()
@ _79_cfb
Watch out!!! the VisibilityDistance parameter in the conf.ini (opengl) must be set to 3 to have the maximum visibility range of 73km and not to the actual range distance like you did! ![]() So VisibilityDistance=3 corresponds to a visibility range, in the game, of 73km! ![]() |
#137
|
||||
|
||||
![]()
~S~
Thanks for clearing that up Devis
__________________
|
#138
|
|||
|
|||
![]()
A bump to keep it on the frontpage
![]() |
#139
|
|||
|
|||
![]()
Well I have so say that these DLLs, minus the full mission builder problem with the damage cities graphics as mentioned before, is otherwise spot on. No visual glitches at all...solves so many problems.
__________________
Find my missions and much more at Mission4Today.com |
#140
|
||||
|
||||
![]()
I've been having an issue with both these March 13th DLLs and the ones before them. As you can see below:
![]() This is on the Kurland map, but this problem also shows up on other maps. In addition to this, I get a lot of flickering with shadows on the water cast from trees and hillsides. I'm also getting issues with stuttering when flying over large cities like Libau (on the Kurland map). I'm using a pair of 8800 GTS cards in SLI mode and have tried various drivers to fix this issue (currently running the new 174.74s). I run in 1920x1200 resolution, all graphics settings maxed out (except for LandGeom). |
![]() |
|
|