![]() |
#111
|
|||
|
|||
![]()
~S~
Im using the 7.11 ati, i used before the latest but reading the posts here changing back to 7.11 and used drivecleaner. Im rather satiesfied with the new dll's, i think the visibility is increased. Thanks a lot CrazyIvan. |
#112
|
||||
|
||||
![]() Quote:
off <catalyst AI> and run it in standard mode. you should have better graphics, although I run mine in x800/9600/9800; I don't mess with all those custom setting those seem to mess things up for me.
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc |
#113
|
|||
|
|||
![]()
Ty Mastiff,
But earlier in posts they recommend the use of the 7.11. Otherside i can try it. But how to turn of the Catalist AI??? I have set the clouds on medium, is that the reason for these poor shadows?? |
#114
|
|||
|
|||
![]() Quote:
Select appropriate video card in il2setup (or pfsetup).1XXX Select desired 32bit-color video mode with stencil enabled! Then run a game and select Perfect Video Mode in game menu! |
#115
|
|||
|
|||
![]()
TY Kya,
Do i have to install the control center also??? Or only the display drivers?? How to turn off the catalist ai?? I cant run the game on perfect, than my graphics are very dizzy when moving head using track ir. I run it on high or excellent. |
#116
|
||||
|
||||
![]()
you need to pick the Video x800/9200/9600/9800 setting then it should let you pick perfect. this settings can be found in the il2settings.exe the icon with the sledg hammer.
As for the clouds you can run them in Detailed also just so you guys know anything over 9600 should run in perfect with all setting on and that also increases your FPS. I run a dual x1600 ATI set up and have all the eye candy on and get 50 to 90 FPS.8.3 drivers. The Catylyst AI is in the 3D setings. yes you need to install the catylyst controler.
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc Last edited by GF_Mastiff; 04-05-2008 at 04:07 AM. |
#117
|
|||
|
|||
![]() Quote:
Yes, get the package with the control Center. I am not sure what disabling AI will do, you can try that. You can disable AI in the control center under 3D->all settings. When Control center starts for the fist time, make sure you chose advanced mode. Also, when you fly with TIR make sure that vSync is enabled, you will lose FPS but that would prevent texture ripping, pawning will be much smoother. |
#118
|
|||
|
|||
![]()
Ty for the answers,
But last and maybe silly question: where can i find the vSync???? |
#119
|
|||
|
|||
![]()
In the control center under 3d->all settings set "Wait for vertical sync" to always on.
|
#120
|
|||
|
|||
![]()
Thanks a lot Ivan, i found it
|
![]() |
|
|