#1
|
|||
|
|||
LERX on WWII aircraft
I always thought the little kink at the leading edge of wing root of P-51D is a high lift device not too dissimilar to LERX on modern jet fighters such as F-18s. However some articles I have read lately said it was none of that. And it was deleted on later H model to save weight. Also, interestingly, almost no US fighters were equipped with leading edge slats as the ones installed on 109s. I know most US fighters emphasized speed, but spring-loaded slats are not really an obstacle to attaining high speed since they are virtually retracted at high speed.
|
#2
|
|||
|
|||
The inner wings on many planes stall before the outer wings where the ailerons are. Having the whole wing stall at the same time is not good design.
|
#3
|
|||
|
|||
Quote:
Western Allied emphasis was increasingly on speed, range and altitude performance as the war progressed; slats were not considered as great a potential advantage as they were thought of as another thing that could go wrong at the worst possible moment 500 miles away from your home base. cheers horseback |
#4
|
|||
|
|||
I see. But the little kink has no aerodynamic benefit for p51 right? Also, isn't slat gonna help with climbing cuz best climbing speeds are usually pretty low.
|
#5
|
|||
|
|||
The P-51H got smaller main wheels so the inner crank to the wing was not required.
|
|
|