|
Controls threads Everything about controls in CoD |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Throttle setting no longer works..
I move my throttle nothing happens.. I go into the controls window .. ACES.. and when I move it I can see the green bar move accordingly and I can see tyhe numbers change.. but in the sim I get nothing.. All the other axes work.. and my throttle works in every other sim I fly.. Any solutions?
|
#2
|
|||
|
|||
Quote:
label each plug and outlet. keep every control in the same label. (sorry if i am not using the correct words. ) Good luck. Last edited by Faustnik; 01-14-2013 at 02:13 AM. |
#3
|
|||
|
|||
Hi BC,
What are the other settings like? My Warthog throttle has the following settings 0% Position 0.06 0% Dead Zone 0.02 100% Position 0.95 100% Dead Zone 0.02 Max% Dead ZOne 0.02 Oh, and I have invert Axis selected. All the best! Last edited by Skoshi Tiger; 01-14-2013 at 03:43 AM. |
#4
|
|||
|
|||
Check in the controls setup that it does not have the throttle as being on a different joystick to the other axis eg Aileron on 'Joystick 1' and throttle on 'Joystick 2'
|
#5
|
||||
|
||||
Since you see movement in green bars is just mather of adjust deadzones (like in MS FSX) as S.Tiger say. Lauch some mission, hit ESC go to Controls and adjust, back to mission and test.
Sokol1 Last edited by Sokol1; 01-15-2013 at 03:10 PM. |
#6
|
|||
|
|||
No joy ............ still the same.
|
#7
|
|||
|
|||
Any other ideas on this? I am still having the same problem and I am totally stumped..
|
#8
|
|||
|
|||
Anthropomorphic enabled in realisam settings?
Try to disable that. |
#9
|
|||
|
|||
That did it .. thank you very much!!
|
|
|